Workstation Configuration Signature Capture Window

PDX Workstation Config

Workstation Configuration Signature Capture Window

The Workstation Configuration Signature Capture window lets you view and modify the settings for the signature capture device attached to the workstation. To access the Workstation Configuration Signature Capture window, select Tools > Workstation Configuration and select the Signature Capture tab.

The following describes the fields on the Workstation Configuration Signature Capture window.

Signature Capture Device

Device Type

Type of signature capture device attached to the workstation: Ingenico eN-Touch 1000, Ingenico i6780, HHP , Hypercom, or VeriFone MX870.

COM Port

Communications port where the device is attached

Signature Capture Proxy - The fields in this section are defined on the Signature Capture window in Communication Settings.

Terminal ID

Terminal ID (IP address) of the specific signature capture device for the workstation.

Note: The system enables this drop-down list if you set the Device Type option to VeriFone MX870.

Host

Hostname of the signature capture proxy server

Port

Network port of the signature capture proxy server

Path

Directory path of the signature capture proxy server

Will Call Signature Capture Methods - The system determines which checkboxes to enable in this section based on the Will Call Signature Capture Method option on the Signature Capture window in Communication Settings. If you have two Will Call workstations—one at the front of the pharmacy and one at the drive through window—you can set the signature capture method on each workstation.

Manual

Patient signs a hard copy document that you file in a designated place and you manually update the status of the signature to ACQUIRED

Scanner

You print a signature block for the selected document, the patient signs it, and you scan the signed signature block

Signature Capture Device

System sends the signature block to signature capture device, the patient signs on the capture pad, then the device sends a digitized image of signature to EPS

POS

Patient signs a signature capture device connected to your point of sale system

Other Signature Capture Methods - The system determines which checkboxes to enable in this section based on the Will Call Signature Capture Method option on the Signature Capture window in Communication Settings.

Manual

Patient signs a hard copy document that you file in a designated place and you manually update the status of the signature to ACQUIRED

Scanner

You print a signature block for the selected document, the patient signs it, and you scan the signed signature block.

Signature Capture Device

System sends the signature block to signature capture device, the patient signs on the capture pad, then the device sends digitized image of the signature to EPS

Select to save any changes you made to the workstation configuration.