PCRE API Overview

Perl Compatible Regular Expressions

previous page next page

pcreapi man page

#include <pcre.h>

pcre *pcre_compile(const char *pattern, int options, const char **errptr, int *erroffset, const unsigned char *tableptr);

pcre *pcre_compile2(const char *pattern, int options, int *errorcodeptr, const char **errptr, int *erroffset, const unsigned char *tableptr);

pcre_extra *pcre_study(const pcre *code, int options, const char **errptr);

int pcre_exec(const pcre *code, const pcre_extra *extra, const char *subject, int length, int startoffset, int options, int *ovector, int ovecsize);

int pcre_dfa_exec(const pcre *code, const pcre_extra *extra, const char *subject, int length, int startoffset, int options, int *ovector, int ovecsize, int *workspace, int wscount);

int pcre_copy_named_substring(const pcre *code, const char *subject, int *ovector, int stringcount, const char *stringname, char *buffer, int buffersize);

int pcre_copy_substring(const char *subject, int *ovector, int stringcount, int stringnumber, char *buffer, int buffersize);

int pcre_get_named_substring(const pcre *code, const char *subject, int *ovector, int stringcount, const char *stringname, const char **stringptr);

int pcre_get_stringnumber(const pcre *code, const char *name);

int pcre_get_stringtable_entries(const pcre *code, const char *name, char **first, char **last);

int pcre_get_substring(const char *subject, int *ovector, int stringcount, int stringnumber, const char **stringptr);

int pcre_get_substring_list(const char *subject, int *ovector, int stringcount, const char ***listptr);

void pcre_free_substring(const char *stringptr);

void pcre_free_substring_list(const char **stringptr);

const unsigned char *pcre_maketables(void);

int pcre_fullinfo(const pcre *code, const pcre_extra *extra, int what, void *where);

int pcre_info(const pcre *code, int *optptr, int *firstcharptr);

int pcre_refcount(pcre *code, int adjust);

int pcre_config(int what, void *where);

char *pcre_version(void);

void (*pcre_malloc)(size_t);

void (*pcre_free)(void *);

void *(*pcre_stack_malloc)(size_t);

void (*pcre_stack_free)(void *);

int (*pcre_callout)(pcre_callout_block *);

PCRE API OVERVIEW

PCRE has its own native API, which is described in this document. There are also some wrapper functions that correspond to the POSIX regular expression API. These are described in the pcreposix documentation. Both of these APIs define a set of C function calls. A C++ wrapper is distributed with PCRE. It is documented in the pcrecpp page.

The native API C function prototypes are defined in the header file pcre.h, and on Unix systems the library itself is called libpcre. It can normally be accessed by adding -lpcre to the command for linking an application that uses PCRE. The header file defines the macros PCRE_MAJOR and PCRE_MINOR to contain the major and minor release numbers for the library. Applications can use these to include support for different releases of PCRE.

The functions pcre_compile(), pcre_compile2(), pcre_study(), and pcre_exec() are used for compiling and matching regular expressions in a Perl-compatible manner. A sample program that demonstrates the simplest way of using them is provided in the file called pcredemo.c in the source distribution. The pcresample documentation describes how to compile and run it.

A second matching function, pcre_dfa_exec(), which is not Perl-compatible, is also provided. This uses a different algorithm for the matching. The alternative algorithm finds all possible matches (at a given point in the subject), and scans the subject just once. However, this algorithm does not return captured substrings. A description of the two matching algorithms and their advantages and disadvantages is given in the pcrematching documentation.

In addition to the main compiling and matching functions, there are convenience functions for extracting captured substrings from a subject string that is matched by pcre_exec(). They are:

  pcre_copy_substring()
  pcre_copy_named_substring()
  pcre_get_substring()
  pcre_get_named_substring()
  pcre_get_substring_list()
  pcre_get_stringnumber()
  pcre_get_stringtable_entries()

pcre_free_substring() and pcre_free_substring_list() are also provided, to free the memory used for extracted strings.

The function pcre_maketables() is used to build a set of character tables in the current locale for passing to pcre_compile(), pcre_exec(), or pcre_dfa_exec(). This is an optional facility that is provided for specialist use. Most commonly, no special tables are passed, in which case internal tables that are generated when PCRE is built are used.

The function pcre_fullinfo() is used to find out information about a compiled pattern; pcre_info() is an obsolete version that returns only some of the available information, but is retained for backwards compatibility. The function pcre_version() returns a pointer to a string containing the version of PCRE and its date of release.

The function pcre_refcount() maintains a reference count in a data block containing a compiled pattern. This is provided for the benefit of object-oriented applications.

The global variables pcre_malloc and pcre_free initially contain the entry points of the standard malloc() and free() functions, respectively. PCRE calls the memory management functions via these variables, so a calling program can replace them if it wishes to intercept the calls. This should be done before calling any PCRE functions.

The global variables pcre_stack_malloc and pcre_stack_free are also indirections to memory management functions. These special functions are used only when PCRE is compiled to use the heap for remembering data, instead of recursive function calls, when running the pcre_exec() function. See the pcrebuild documentation for details of how to do this. It is a non-standard way of building PCRE, for use in environments that have limited stacks. Because of the greater use of memory management, it runs more slowly. Separate functions are provided so that special-purpose external code can be used for this case. When used, these functions are always called in a stack-like manner (last obtained, first freed), and always for memory blocks of the same size. There is a discussion about PCRE's stack usage in the pcrestack documentation.

The global variable pcre_callout initially contains NULL. It can be set by the caller to a "callout" function, which PCRE will then call at specified points during a matching operation. Details are given in the pcrecallout documentation.

NEWLINES

PCRE supports five different conventions for indicating line breaks in strings: a single CR (carriage return) character, a single LF (linefeed) character, the two-character sequence CRLF, any of the three preceding, or any Unicode newline sequence. The Unicode newline sequences are the three just mentioned, plus the single characters VT (vertical tab, U+000B), FF (formfeed, U+000C), NEL (next line, U+0085), LS (line separator, U+2028), and PS (paragraph separator, U+2029).

Each of the first three conventions is used by at least one operating system as its standard newline sequence. When PCRE is built, a default can be specified. The default default is LF, which is the Unix standard. When PCRE is run, the default can be overridden, either when a pattern is compiled, or when it is matched.

At compile time, the newline convention can be specified by the options argument of pcre_compile(), or it can be specified by special text at the start of the pattern itself; this overrides any other settings. See the pcrepattern page for details of the special character sequences.

In the PCRE documentation the word "newline" is used to mean "the character or pair of characters that indicate a line break". The choice of newline convention affects the handling of the dot, circumflex, and dollar metacharacters, the handling of #-comments in /x mode, and, when CRLF is a recognized line ending sequence, the match position advancement for a non-anchored pattern. There is more detail about this in the section on pcre_exec() options below.

The choice of newline convention does not affect the interpretation of the \n or \r escape sequences, nor does it affect what \R matches, which is controlled in a similar way, but by separate options.

MULTITHREADING

The PCRE functions can be used in multi-threading applications, with the proviso that the memory management functions pointed to by pcre_malloc, pcre_free, pcre_stack_malloc, and pcre_stack_free, and the callout function pointed to by pcre_callout, are shared by all threads.

The compiled form of a regular expression is not altered during matching, so the same compiled pattern can safely be used by several threads at once.

SAVING PRECOMPILED PATTERNS FOR LATER USE

The compiled form of a regular expression can be saved and re-used at a later time, possibly by a different program, and even on a host other than the one on which it was compiled. Details are given in the pcreprecompile documentation. However, compiling a regular expression with one version of PCRE for use with a different version is not guaranteed to work and may cause crashes.

CHECKING BUILD-TIME OPTIONS

int pcre_config(int what, void *where);

The function pcre_config() makes it possible for a PCRE client to discover which optional features have been compiled into the PCRE library. The pcrebuild documentation has more details about these optional features.

The first argument for pcre_config() is an integer, specifying which information is required; the second argument is a pointer to a variable into which the information is placed. The following information is available:

  PCRE_CONFIG_UTF8

The output is an integer that is set to one if UTF-8 support is available; otherwise it is set to zero.

  PCRE_CONFIG_UNICODE_PROPERTIES

The output is an integer that is set to one if support for Unicode character properties is available; otherwise it is set to zero.

  PCRE_CONFIG_NEWLINE

The output is an integer whose value specifies the default character sequence that is recognized as meaning "newline". The four values that are supported are: 10 for LF, 13 for CR, 3338 for CRLF, -2 for ANYCRLF, and -1 for ANY. The default should normally be the standard sequence for your operating system.

  PCRE_CONFIG_BSR

The output is an integer whose value indicates what character sequences the \R escape sequence matches by default. A value of 0 means that \R matches any Unicode line ending sequence; a value of 1 means that \R matches only CR, LF, or CRLF. The default can be overridden when a pattern is compiled or matched.

  PCRE_CONFIG_LINK_SIZE

The output is an integer that contains the number of bytes used for internal linkage in compiled regular expressions. The value is 2, 3, or 4. Larger values allow larger regular expressions to be compiled, at the expense of slower matching. The default value of 2 is sufficient for all but the most massive patterns, since it allows the compiled pattern to be up to 64K in size.

  PCRE_CONFIG_POSIX_MALLOC_THRESHOLD

The output is an integer that contains the threshold above which the POSIX interface uses malloc() for output vectors. Further details are given in the pcreposix documentation.

  PCRE_CONFIG_MATCH_LIMIT

The output is an integer that gives the default limit for the number of internal matching function calls in a pcre_exec() execution. Further details are given with pcre_exec() below.

  PCRE_CONFIG_MATCH_LIMIT_RECURSION

The output is an integer that gives the default limit for the depth of recursion when calling the internal matching function in a pcre_exec() execution. Further details are given with pcre_exec() below.

  PCRE_CONFIG_STACKRECURSE

The output is an integer that is set to one if internal recursion when running pcre_exec() is implemented by recursive function calls that use the stack to remember their state. This is the usual way that PCRE is compiled. The output is zero if PCRE was compiled to use blocks of data on the heap instead of recursive function calls. In this case, pcre_stack_malloc and pcre_stack_free are called to manage memory blocks on the heap, thus avoiding the use of the stack.

COMPILING A PATTERN

pcre *pcre_compile(const char *pattern, int options, const char **errptr, int *erroffset, const unsigned char *tableptr); pcre *pcre_compile2(const char *pattern, int options, int *errorcodeptr, const char **errptr, int *erroffset, const unsigned char *tableptr);

Either of the functions pcre_compile() or pcre_compile2() can be called to compile a pattern into an internal form. The only difference between the two interfaces is that pcre_compile2() has an additional argument, errorcodeptr, via which a numerical error code can be returned.

The pattern is a C string terminated by a binary zero, and is passed in the pattern argument. A pointer to a single block of memory that is obtained via pcre_malloc is returned. This contains the compiled code and related data. The pcre type is defined for the returned block; this is a typedef for a structure whose contents are not externally defined. It is up to the caller to free the memory (via pcre_free) when it is no longer required.

Although the compiled code of a PCRE regex is relocatable, that is, it does not depend on memory location, the complete pcre data block is not fully relocatable, because it may contain a copy of the tableptr argument, which is an address (see below).

The options argument contains various bit settings that affect the compilation. It should be zero if no options are required. The available options are described below. Some of them, in particular, those that are compatible with Perl, can also be set and unset from within the pattern (see the detailed description in the pcrepattern documentation). For these options, the contents of the options argument specifies their initial settings at the start of compilation and execution. The PCRE_ANCHORED and PCRE_NEWLINE_xxx options can be set at the time of matching as well as at compile time.

If errptr is NULL, pcre_compile() returns NULL immediately. Otherwise, if compilation of a pattern fails, pcre_compile() returns NULL, and sets the variable pointed to by errptr to point to a textual error message. This is a static string that is part of the library. You must not try to free it. The offset from the start of the pattern to the character where the error was discovered is placed in the variable pointed to by erroffset, which must not be NULL. If it is, an immediate error is given.

If pcre_compile2() is used instead of pcre_compile(), and the errorcodeptr argument is not NULL, a non-zero error code number is returned via this argument in the event of an error. This is in addition to the textual error message. Error codes and messages are listed below.

If the final argument, tableptr, is NULL, PCRE uses a default set of character tables that are built when PCRE is compiled, using the default C locale. Otherwise, tableptr must be an address that is the result of a call to pcre_maketables(). This value is stored with the compiled pattern, and used again by pcre_exec(), unless another table pointer is passed to it. For more discussion, see the section on locale support below.

This code fragment shows a typical straightforward call to pcre_compile():

  pcre *re;
  const char *error;
  int erroffset;
  re = pcre_compile(
    "^A.*Z",          /* the pattern */
    0,                /* default options */
    &error;,           /* for error message */
    &erroffset;,       /* for error offset */
    NULL);            /* use default character tables */

The following names for option bits are defined in the pcre.h header file:

  PCRE_ANCHORED

If this bit is set, the pattern is forced to be "anchored", that is, it is constrained to match only at the first matching point in the string that is being searched (the "subject string"). This effect can also be achieved by appropriate constructs in the pattern itself, which is the only way to do it in Perl.

  PCRE_AUTO_CALLOUT

If this bit is set, pcre_compile() automatically inserts callout items, all with number 255, before each pattern item. For discussion of the callout facility, see the pcrecallout documentation.

  PCRE_BSR_ANYCRLF
  PCRE_BSR_UNICODE

These options (which are mutually exclusive) control what the \R escape sequence matches. The choice is either to match only CR, LF, or CRLF, or to match any Unicode newline sequence. The default is specified when PCRE is built. It can be overridden from within the pattern, or by setting an option when a compiled pattern is matched.

  PCRE_CASELESS

If this bit is set, letters in the pattern match both upper and lower case letters. It is equivalent to Perl's /i option, and it can be changed within a pattern by a (?i) option setting. In UTF-8 mode, PCRE always understands the concept of case for characters whose values are less than 128, so caseless matching is always possible. For characters with higher values, the concept of case is supported if PCRE is compiled with Unicode property support, but not otherwise. If you want to use caseless matching for characters 128 and above, you must ensure that PCRE is compiled with Unicode property support as well as with UTF-8 support.

  PCRE_DOLLAR_ENDONLY

If this bit is set, a dollar metacharacter in the pattern matches only at the end of the subject string. Without this option, a dollar also matches immediately before a newline at the end of the string (but not before any other newlines). The PCRE_DOLLAR_ENDONLY option is ignored if PCRE_MULTILINE is set. There is no equivalent to this option in Perl, and no way to set it within a pattern.

  PCRE_DOTALL

If this bit is set, a dot metacharater in the pattern matches all characters, including those that indicate newline. Without it, a dot does not match when the current position is at a newline. This option is equivalent to Perl's /s option, and it can be changed within a pattern by a (?s) option setting. A negative class such as [^a] always matches newline characters, independent of the setting of this option.

  PCRE_DUPNAMES

If this bit is set, names used to identify capturing subpatterns need not be unique. This can be helpful for certain types of pattern when it is known that only one instance of the named subpattern can ever be matched. There are more details of named subpatterns below; see also the pcrepattern documentation.

  PCRE_EXTENDED

If this bit is set, whitespace data characters in the pattern are totally ignored except when escaped or inside a character class. Whitespace does not include the VT character (code 11). In addition, characters between an unescaped # outside a character class and the next newline, inclusive, are also ignored. This is equivalent to Perl's /x option, and it can be changed within a pattern by a (?x) option setting.

This option makes it possible to include comments inside complicated patterns. Note, however, that this applies only to data characters. Whitespace characters may never appear within special character sequences in a pattern, for example within the sequence (?( which introduces a conditional subpattern.

  PCRE_EXTRA

This option was invented in order to turn on additional functionality of PCRE that is incompatible with Perl, but it is currently of very little use. When set, any backslash in a pattern that is followed by a letter that has no special meaning causes an error, thus reserving these combinations for future expansion. By default, as in Perl, a backslash followed by a letter with no special meaning is treated as a literal. (Perl can, however, be persuaded to give a warning for this.) There are at present no other features controlled by this option. It can also be set by a (?X) option setting within a pattern.

  PCRE_FIRSTLINE

If this option is set, an unanchored pattern is required to match before or at the first newline in the subject string, though the matched text may continue over the newline.

  PCRE_JAVASCRIPT_COMPAT

If this option is set, PCRE's behaviour is changed in some ways so that it is compatible with JavaScript rather than Perl. The changes are as follows:

(1) A lone closing square bracket in a pattern causes a compile-time error, because this is illegal in JavaScript (by default it is treated as a data character). Thus, the pattern AB]CD becomes illegal when this option is set.

(2) At run time, a back reference to an unset subpattern group matches an empty string (by default this causes the current matching alternative to fail). A pattern such as (\1)(a) succeeds when this option is set (assuming it can find an "a" in the subject), whereas it fails by default, for Perl compatibility.

  PCRE_MULTILINE

By default, PCRE treats the subject string as consisting of a single line of characters (even if it actually contains newlines). The "start of line" metacharacter (^) matches only at the start of the string, while the "end of line" metacharacter ($) matches only at the end of the string, or before a terminating newline (unless PCRE_DOLLAR_ENDONLY is set). This is the same as Perl.

When PCRE_MULTILINE it is set, the "start of line" and "end of line" constructs match immediately following or immediately before internal newlines in the subject string, respectively, as well as at the very start and end. This is equivalent to Perl's /m option, and it can be changed within a pattern by a (?m) option setting. If there are no newlines in a subject string, or no occurrences of ^ or $ in a pattern, setting PCRE_MULTILINE has no effect.

  PCRE_NEWLINE_CR
  PCRE_NEWLINE_LF
  PCRE_NEWLINE_CRLF
  PCRE_NEWLINE_ANYCRLF
  PCRE_NEWLINE_ANY

These options override the default newline definition that was chosen when PCRE was built. Setting the first or the second specifies that a newline is indicated by a single character (CR or LF, respectively). Setting PCRE_NEWLINE_CRLF specifies that a newline is indicated by the two-character CRLF sequence. Setting PCRE_NEWLINE_ANYCRLF specifies that any of the three preceding sequences should be recognized. Setting PCRE_NEWLINE_ANY specifies that any Unicode newline sequence should be recognized. The Unicode newline sequences are the three just mentioned, plus the single characters VT (vertical tab, U+000B), FF (formfeed, U+000C), NEL (next line, U+0085), LS (line separator, U+2028), and PS (paragraph separator, U+2029). The last two are recognized only in UTF-8 mode.

The newline setting in the options word uses three bits that are treated as a number, giving eight possibilities. Currently only six are used (default plus the five values above). This means that if you set more than one newline option, the combination may or may not be sensible. For example, PCRE_NEWLINE_CR with PCRE_NEWLINE_LF is equivalent to PCRE_NEWLINE_CRLF, but other combinations may yield unused numbers and cause an error.

The only time that a line break is specially recognized when compiling a pattern is if PCRE_EXTENDED is set, and an unescaped # outside a character class is encountered. This indicates a comment that lasts until after the next line break sequence. In other circumstances, line break sequences are treated as literal data, except that in PCRE_EXTENDED mode, both CR and LF are treated as whitespace characters and are therefore ignored.

The newline option that is set at compile time becomes the default that is used for pcre_exec() and pcre_dfa_exec(), but it can be overridden.

  PCRE_NO_AUTO_CAPTURE

If this option is set, it disables the use of numbered capturing parentheses in the pattern. Any opening parenthesis that is not followed by ? behaves as if it were followed by ?: but named parentheses can still be used for capturing (and they acquire numbers in the usual way). There is no equivalent of this option in Perl.

  PCRE_UNGREEDY

This option inverts the "greediness" of the quantifiers so that they are not greedy by default, but become greedy if followed by "?". It is not compatible with Perl. It can also be set by a (?U) option setting within the pattern.

  PCRE_UTF8

This option causes PCRE to regard both the pattern and the subject as strings of UTF-8 characters instead of single-byte character strings. However, it is available only when PCRE is built to include UTF-8 support. If not, the use of this option provokes an error. Details of how this option changes the behaviour of PCRE are given in the section on UTF-8 support in the main pcre page.

  PCRE_NO_UTF8_CHECK

When PCRE_UTF8 is set, the validity of the pattern as a UTF-8 string is automatically checked. There is a discussion about the validity of UTF-8 strings in the main pcre page. If an invalid UTF-8 sequence of bytes is found, pcre_compile() returns an error. If you already know that your pattern is valid, and you want to skip this check for performance reasons, you can set the PCRE_NO_UTF8_CHECK option. When it is set, the effect of passing an invalid UTF-8 string as a pattern is undefined. It may cause your program to crash. Note that this option can also be passed to pcre_exec() and pcre_dfa_exec(), to suppress the UTF-8 validity checking of subject strings.

COMPILATION ERROR CODES

The following table lists the error codes than may be returned by pcre_compile2(), along with the error messages that may be returned by both compiling functions. As PCRE has developed, some error codes have fallen out of use. To avoid confusion, they have not been re-used.

   0  no error
   1  \ at end of pattern
   2  \c at end of pattern
   3  unrecognized character follows \
   4  numbers out of order in {} quantifier
   5  number too big in {} quantifier
   6  missing terminating ] for character class
   7  invalid escape sequence in character class
   8  range out of order in character class
   9  nothing to repeat
  10  [this code is not in use]
  11  internal error: unexpected repeat
  12  unrecognized character after (? or (?-
  13  POSIX named classes are supported only within a class
  14  missing )
  15  reference to non-existent subpattern
  16  erroffset passed as NULL
  17  unknown option bit(s) set
  18  missing ) after comment
  19  [this code is not in use]
  20  regular expression is too large
  21  failed to get memory
  22  unmatched parentheses
  23  internal error: code overflow
  24  unrecognized character after (?<
  25  lookbehind assertion is not fixed length
  26  malformed number or name after (?(
  27  conditional group contains more than two branches
  28  assertion expected after (?(
  29  (?R or (?[+-]digits must be followed by )
  30  unknown POSIX class name
  31  POSIX collating elements are not supported
  32  this version of PCRE is not compiled with PCRE_UTF8 support
  33  [this code is not in use]
  34  character value in \x{...} sequence is too large
  35  invalid condition (?(0)
  36  \C not allowed in lookbehind assertion
  37  PCRE does not support \L, \l, \N, \U, or \u
  38  number after (?C is > 255
  39  closing ) for (?C expected
  40  recursive call could loop indefinitely
  41  unrecognized character after (?P
  42  syntax error in subpattern name (missing terminator)
  43  two named subpatterns have the same name
  44  invalid UTF-8 string
  45  support for \P, \p, and \X has not been compiled
  46  malformed \P or \p sequence
  47  unknown property name after \P or \p
  48  subpattern name is too long (maximum 32 characters)
  49  too many named subpatterns (maximum 10000)
  50  [this code is not in use]
  51  octal value is greater than \377 (not in UTF-8 mode)
  52  internal error: overran compiling workspace
  53  internal error: previously-checked referenced subpattern not found
  54  DEFINE group contains more than one branch
  55  repeating a DEFINE group is not allowed
  56  inconsistent NEWLINE options
  57  \g is not followed by a braced, angle-bracketed, or quoted
        name/number or by a plain number
  58  a numbered reference must not be zero
  59  (*VERB) with an argument is not supported
  60  (*VERB) not recognized
  61  number is too big
  62  subpattern name expected
  63  digit expected after (?+
  64  ] is an invalid data character in JavaScript compatibility mode

The numbers 32 and 10000 in errors 48 and 49 are defaults; different values may be used if the limits were changed when PCRE was built.

STUDYING A PATTERN

pcre_extra *pcre_study(const pcre *code, int options const char **errptr);

If a compiled pattern is going to be used several times, it is worth spending more time analyzing it in order to speed up the time taken for matching. The function pcre_study() takes a pointer to a compiled pattern as its first argument. If studying the pattern produces additional information that will help speed up matching, pcre_study() returns a pointer to a pcre_extra block, in which the study_data field points to the results of the study.

The returned value from pcre_study() can be passed directly to pcre_exec(). However, a pcre_extra block also contains other fields that can be set by the caller before the block is passed; these are described below in the section on matching a pattern.

If studying the pattern does not produce any additional information pcre_study() returns NULL. In that circumstance, if the calling program wants to pass any of the other fields to pcre_exec(), it must set up its own pcre_extra block.

The second argument of pcre_study() contains option bits. At present, no options are defined, and this argument should always be zero.

The third argument for pcre_study() is a pointer for an error message. If studying succeeds (even if no data is returned), the variable it points to is set to NULL. Otherwise it is set to point to a textual error message. This is a static string that is part of the library. You must not try to free it. You should test the error pointer for NULL after calling pcre_study(), to be sure that it has run successfully.

This is a typical call to pcre_study():

  pcre_extra *pe;
  pe = pcre_study(
    re,             /* result of pcre_compile() */
    0,              /* no options exist */
    &error;);        /* set to NULL or points to a message */

At present, studying a pattern is useful only for non-anchored patterns that do not have a single fixed starting character. A bitmap of possible starting bytes is created.

LOCALE SUPPORT

PCRE handles caseless matching, and determines whether characters are letters, digits, or whatever, by reference to a set of tables, indexed by character value. When running in UTF-8 mode, this applies only to characters with codes less than 128. Higher-valued codes never match escapes such as \w or \d, but can be tested with \p if PCRE is built with Unicode character property support. The use of locales with Unicode is discouraged. If you are handling characters with codes greater than 128, you should either use UTF-8 and Unicode, or use locales, but not try to mix the two.

PCRE contains an internal set of tables that are used when the final argument of pcre_compile() is NULL. These are sufficient for many applications. Normally, the internal tables recognize only ASCII characters. However, when PCRE is built, it is possible to cause the internal tables to be rebuilt in the default "C" locale of the local system, which may cause them to be different.

The internal tables can always be overridden by tables supplied by the application that calls PCRE. These may be created in a different locale from the default. As more and more applications change to using Unicode, the need for this locale support is expected to die away.

External tables are built by calling the pcre_maketables() function, which has no arguments, in the relevant locale. The result can then be passed to pcre_compile() or pcre_exec() as often as necessary. For example, to build and use tables that are appropriate for the French locale (where accented characters with values greater than 128 are treated as letters), the following code could be used:

  setlocale(LC_CTYPE, "fr_FR");
  tables = pcre_maketables();
  re = pcre_compile(..., tables);

The locale name "fr_FR" is used on Linux and other Unix-like systems; if you are using Windows, the name for the French locale is "french".

When pcre_maketables() runs, the tables are built in memory that is obtained via pcre_malloc. It is the caller's responsibility to ensure that the memory containing the tables remains available for as long as it is needed.

The pointer that is passed to pcre_compile() is saved with the compiled pattern, and the same tables are used via this pointer by pcre_study() and normally also by pcre_exec(). Thus, by default, for any single pattern, compilation, studying and matching all happen in the same locale, but different patterns can be compiled in different locales.

It is possible to pass a table pointer or NULL (indicating the use of the internal tables) to pcre_exec(). Although not intended for this purpose, this facility could be used to match a pattern in a different locale from the one in which it was compiled. Passing table pointers at run time is discussed below in the section on matching a pattern.

INFORMATION ABOUT A PATTERN

int pcre_fullinfo(const pcre *code, const pcre_extra *extra, int what, void *where);

The pcre_fullinfo() function returns information about a compiled pattern. It replaces the obsolete pcre_info() function, which is nevertheless retained for backwards compability (and is documented below).

The first argument for pcre_fullinfo() is a pointer to the compiled pattern. The second argument is the result of pcre_study(), or NULL if the pattern was not studied. The third argument specifies which piece of information is required, and the fourth argument is a pointer to a variable to receive the data. The yield of the function is zero for success, or one of the following negative numbers:

  PCRE_ERROR_NULL       the argument code was NULL
                        the argument where was NULL
  PCRE_ERROR_BADMAGIC   the "magic number" was not found
  PCRE_ERROR_BADOPTION  the value of what was invalid

The "magic number" is placed at the start of each compiled pattern as an simple check against passing an arbitrary memory pointer. Here is a typical call of pcre_fullinfo(), to obtain the length of the compiled pattern:

  int rc;
  size_t length;
  rc = pcre_fullinfo(
    re,               /* result of pcre_compile() */
    pe,               /* result of pcre_study(), or NULL */
    PCRE_INFO_SIZE,   /* what is required */
    &length;);         /* where to put the data */

The possible values for the third argument are defined in pcre.h, and are as follows:

  PCRE_INFO_BACKREFMAX

Return the number of the highest back reference in the pattern. The fourth argument should point to an int variable. Zero is returned if there are no back references.

  PCRE_INFO_CAPTURECOUNT

Return the number of capturing subpatterns in the pattern. The fourth argument should point to an int variable.

  PCRE_INFO_DEFAULT_TABLES

Return a pointer to the internal default character tables within PCRE. The fourth argument should point to an unsigned char * variable. This information call is provided for internal use by the pcre_study() function. External callers can cause PCRE to use its internal tables by passing a NULL table pointer.

  PCRE_INFO_FIRSTBYTE

Return information about the first byte of any matched string, for a non-anchored pattern. The fourth argument should point to an int variable. (This option used to be called PCRE_INFO_FIRSTCHAR; the old name is still recognized for backwards compatibility.)

If there is a fixed first byte, for example, from a pattern such as (cat|cow|coyote), its value is returned. Otherwise, if either

(a) the pattern was compiled with the PCRE_MULTILINE option, and every branch starts with "^", or

(b) every branch of the pattern starts with ".*" and PCRE_DOTALL is not set (if it were set, the pattern would be anchored),

-1 is returned, indicating that the pattern matches only at the start of a subject string or after any newline within the string. Otherwise -2 is returned. For anchored patterns, -2 is returned.

  PCRE_INFO_FIRSTTABLE

If the pattern was studied, and this resulted in the construction of a 256-bit table indicating a fixed set of bytes for the first byte in any matching string, a pointer to the table is returned. Otherwise NULL is returned. The fourth argument should point to an unsigned char * variable.

  PCRE_INFO_HASCRORLF

Return 1 if the pattern contains any explicit matches for CR or LF characters, otherwise 0. The fourth argument should point to an int variable. An explicit match is either a literal CR or LF character, or \r or \n.

  PCRE_INFO_JCHANGED

Return 1 if the (?J) or (?-J) option setting is used in the pattern, otherwise 0. The fourth argument should point to an int variable. (?J) and (?-J) set and unset the local PCRE_DUPNAMES option, respectively.

  PCRE_INFO_LASTLITERAL

Return the value of the rightmost literal byte that must exist in any matched string, other than at its start, if such a byte has been recorded. The fourth argument should point to an int variable. If there is no such byte, -1 is returned. For anchored patterns, a last literal byte is recorded only if it follows something of variable length. For example, for the pattern /^a\d+z\d+/ the returned value is "z", but for /^a\dz\d/ the returned value is -1.

  PCRE_INFO_NAMECOUNT
  PCRE_INFO_NAMEENTRYSIZE
  PCRE_INFO_NAMETABLE

PCRE supports the use of named as well as numbered capturing parentheses. The names are just an additional way of identifying the parentheses, which still acquire numbers. Several convenience functions such as pcre_get_named_substring() are provided for extracting captured substrings by name. It is also possible to extract the data directly, by first converting the name to a number in order to access the correct pointers in the output vector (described with pcre_exec() below). To do the conversion, you need to use the name-to-number map, which is described by these three values.

The map consists of a number of fixed-size entries. PCRE_INFO_NAMECOUNT gives the number of entries, and PCRE_INFO_NAMEENTRYSIZE gives the size of each entry; both of these return an int value. The entry size depends on the length of the longest name. PCRE_INFO_NAMETABLE returns a pointer to the first entry of the table (a pointer to char). The first two bytes of each entry are the number of the capturing parenthesis, most significant byte first. The rest of the entry is the corresponding name, zero terminated. The names are in alphabetical order. When PCRE_DUPNAMES is set, duplicate names are in order of their parentheses numbers. For example, consider the following pattern (assume PCRE_EXTENDED is set, so white space - including newlines - is ignored):

  (?<date> (?<year>(\d\d)?\d\d) - (?<month>\d\d) - (?<day>\d\d) )

There are four named subpatterns, so the table has four entries, and each entry in the table is eight bytes long. The table is as follows, with non-printing bytes shows in hexadecimal, and undefined bytes shown as ??:

  00 01 d  a  t  e  00 ??
  00 05 d  a  y  00 ?? ??
  00 04 m  o  n  t  h  00
  00 02 y  e  a  r  00 ??

When writing code to extract data from named subpatterns using the name-to-number map, remember that the length of the entries is likely to be different for each compiled pattern.

  PCRE_INFO_OKPARTIAL

Return 1 if the pattern can be used for partial matching, otherwise 0. The fourth argument should point to an int variable. The pcrepartial documentation lists the restrictions that apply to patterns when partial matching is used.

  PCRE_INFO_OPTIONS

Return a copy of the options with which the pattern was compiled. The fourth argument should point to an unsigned long int variable. These option bits are those specified in the call to pcre_compile(), modified by any top-level option settings at the start of the pattern itself. In other words, they are the options that will be in force when matching starts. For example, if the pattern /(?im)abc(?-i)d/ is compiled with the PCRE_EXTENDED option, the result is PCRE_CASELESS, PCRE_MULTILINE, and PCRE_EXTENDED.

A pattern is automatically anchored by PCRE if all of its top-level alternatives begin with one of the following:

  ^     unless PCRE_MULTILINE is set
  \A    always
  \G    always
  .*    if PCRE_DOTALL is set and there are no back references to the subpattern in which .* appears

For such patterns, the PCRE_ANCHORED bit is set in the options returned by pcre_fullinfo().

  PCRE_INFO_SIZE

Return the size of the compiled pattern, that is, the value that was passed as the argument to pcre_malloc() when PCRE was getting memory in which to place the compiled data. The fourth argument should point to a size_t variable.

  PCRE_INFO_STUDYSIZE

Return the size of the data block pointed to by the study_data field in a pcre_extra block. That is, it is the value that was passed to pcre_malloc() when PCRE was getting memory into which to place the data created by pcre_study(). The fourth argument should point to a size_t variable.

OBSOLETE INFO FUNCTION

int pcre_info(const pcre *code, int *optptr, int *firstcharptr);

The pcre_info() function is now obsolete because its interface is too restrictive to return all the available data about a compiled pattern. New programs should use pcre_fullinfo() instead. The yield of pcre_info() is the number of capturing subpatterns, or one of the following negative numbers:

  PCRE_ERROR_NULL       the argument code was NULL
  PCRE_ERROR_BADMAGIC   the "magic number" was not found

If the optptr argument is not NULL, a copy of the options with which the pattern was compiled is placed in the integer it points to (see PCRE_INFO_OPTIONS above).

If the pattern is not anchored and the firstcharptr argument is not NULL, it is used to pass back information about the first character of any matched string (see PCRE_INFO_FIRSTBYTE above).

REFERENCE COUNTS

int pcre_refcount(pcre *code, int adjust);

The pcre_refcount() function is used to maintain a reference count in the data block that contains a compiled pattern. It is provided for the benefit of applications that operate in an object-oriented manner, where different parts of the application may be using the same compiled pattern, but you want to free the block when they are all done.

When a pattern is compiled, the reference count field is initialized to zero. It is changed only by calling this function, whose action is to add the adjust value (which may be positive or negative) to it. The yield of the function is the new value. However, the value of the count is constrained to lie between 0 and 65535, inclusive. If the new value is outside these limits, it is forced to the appropriate limit value.

Except when it is zero, the reference count is not correctly preserved if a pattern is compiled on one host and then transferred to a host whose byte-order is different. (This seems a highly unlikely scenario.)

MATCHING A PATTERN: THE TRADITIONAL FUNCTION

int pcre_exec(const pcre *code, const pcre_extra *extra, const char *subject, int length, int startoffset, int options, int *ovector, int ovecsize);

The function pcre_exec() is called to match a subject string against a compiled pattern, which is passed in the code argument. If the pattern has been studied, the result of the study should be passed in the extra argument. This function is the main matching facility of the library, and it operates in a Perl-like manner. For specialist use there is also an alternative matching function, which is described below in the section about the pcre_dfa_exec() function.

In most applications, the pattern will have been compiled (and optionally studied) in the same process that calls pcre_exec(). However, it is possible to save compiled patterns and study data, and then use them later in different processes, possibly even on different hosts. For a discussion about this, see the pcreprecompile documentation.

Here is an example of a simple call to pcre_exec():

  int rc;
  int ovector[30];
  rc = pcre_exec(
    re,             /* result of pcre_compile() */
    NULL,           /* we didn't study the pattern */
    "some string",  /* the subject string */
    11,             /* the length of the subject string */
    0,              /* start at offset 0 in the subject */
    0,              /* default options */
    ovector,        /* vector of integers for substring information */
    30);            /* number of elements (NOT size in bytes) */

Extra data for pcre_exec()

If the extra argument is not NULL, it must point to a pcre_extra data block. The pcre_study() function returns such a block (when it doesn't return NULL), but you can also create one for yourself, and pass additional information in it. The pcre_extra block contains the following fields (not necessarily in this order):

  unsigned long int flags;
  void *study_data;
  unsigned long int match_limit;
  unsigned long int match_limit_recursion;
  void *callout_data;
  const unsigned char *tables;

The flags field is a bitmap that specifies which of the other fields are set. The flag bits are:

  PCRE_EXTRA_STUDY_DATA
  PCRE_EXTRA_MATCH_LIMIT
  PCRE_EXTRA_MATCH_LIMIT_RECURSION
  PCRE_EXTRA_CALLOUT_DATA
  PCRE_EXTRA_TABLES

Other flag bits should be set to zero. The study_data field is set in the pcre_extra block that is returned by pcre_study(), together with the appropriate flag bit. You should not set this yourself, but you may add to the block by setting the other fields and their corresponding flag bits.

The match_limit field provides a means of preventing PCRE from using up a vast amount of resources when running patterns that are not going to match, but which have a very large number of possibilities in their search trees. The classic example is the use of nested unlimited repeats.

Internally, PCRE uses a function called match() which it calls repeatedly (sometimes recursively). The limit set by match_limit is imposed on the number of times this function is called during a match, which has the effect of limiting the amount of backtracking that can take place. For patterns that are not anchored, the count restarts from zero for each position in the subject string.

The default value for the limit can be set when PCRE is built; the default default is 10 million, which handles all but the most extreme cases. You can override the default by suppling pcre_exec() with a pcre_extra block in which match_limit is set, and PCRE_EXTRA_MATCH_LIMIT is set in the flags field. If the limit is exceeded, pcre_exec() returns PCRE_ERROR_MATCHLIMIT.

The match_limit_recursion field is similar to match_limit, but instead of limiting the total number of times that match() is called, it limits the depth of recursion. The recursion depth is a smaller number than the total number of calls, because not all calls to match() are recursive. This limit is of use only if it is set smaller than match_limit.

Limiting the recursion depth limits the amount of stack that can be used, or, when PCRE has been compiled to use memory on the heap instead of the stack, the amount of heap memory that can be used.

The default value for match_limit_recursion can be set when PCRE is built; the default default is the same value as the default for match_limit. You can override the default by suppling pcre_exec() with a pcre_extra block in which match_limit_recursion is set, and PCRE_EXTRA_MATCH_LIMIT_RECURSION is set in the flags field. If the limit is exceeded, pcre_exec() returns PCRE_ERROR_RECURSIONLIMIT.

The pcre_callout field is used in conjunction with the "callout" feature, which is described in the pcrecallout documentation.

The tables field is used to pass a character tables pointer to pcre_exec(); this overrides the value that is stored with the compiled pattern. A non-NULL value is stored with the compiled pattern only if custom tables were supplied to pcre_compile() via its tableptr argument. If NULL is passed to pcre_exec() using this mechanism, it forces PCRE's internal tables to be used. This facility is helpful when re-using patterns that have been saved after compiling with an external set of tables, because the external tables might be at a different address when pcre_exec() is called. See the pcreprecompile documentation for a discussion of saving compiled patterns for later use.

Option bits for pcre_exec()

The unused bits of the options argument for pcre_exec() must be zero. The only bits that may be set are PCRE_ANCHORED, PCRE_NEWLINE_xxx, PCRE_NOTBOL, PCRE_NOTEOL, PCRE_NOTEMPTY, PCRE_NO_UTF8_CHECK and PCRE_PARTIAL.

  PCRE_ANCHORED

The PCRE_ANCHORED option limits pcre_exec() to matching at the first matching position. If a pattern was compiled with PCRE_ANCHORED, or turned out to be anchored by virtue of its contents, it cannot be made unachored at matching time.

  PCRE_BSR_ANYCRLF
  PCRE_BSR_UNICODE

These options (which are mutually exclusive) control what the \R escape sequence matches. The choice is either to match only CR, LF, or CRLF, or to match any Unicode newline sequence. These options override the choice that was made or defaulted when the pattern was compiled.

  PCRE_NEWLINE_CR
  PCRE_NEWLINE_LF
  PCRE_NEWLINE_CRLF
  PCRE_NEWLINE_ANYCRLF
  PCRE_NEWLINE_ANY

These options override the newline definition that was chosen or defaulted when the pattern was compiled. For details, see the description of pcre_compile() above. During matching, the newline choice affects the behaviour of the dot, circumflex, and dollar metacharacters. It may also alter the way the match position is advanced after a match failure for an unanchored pattern.

When PCRE_NEWLINE_CRLF, PCRE_NEWLINE_ANYCRLF, or PCRE_NEWLINE_ANY is set, and a match attempt for an unanchored pattern fails when the current position is at a CRLF sequence, and the pattern contains no explicit matches for CR or LF characters, the match position is advanced by two characters instead of one, in other words, to after the CRLF.

The above rule is a compromise that makes the most common cases work as expected. For example, if the pattern is .+A (and the PCRE_DOTALL option is not set), it does not match the string "\r\nA" because, after failing at the start, it skips both the CR and the LF before retrying. However, the pattern [\r\n]A does match that string, because it contains an explicit CR or LF reference, and so advances only by one character after the first failure.

An explicit match for CR of LF is either a literal appearance of one of those characters, or one of the \r or \n escape sequences. Implicit matches such as [^X] do not count, nor does \s (which includes CR and LF in the characters that it matches).

Notwithstanding the above, anomalous effects may still occur when CRLF is a valid newline sequence and explicit \r or \n escapes appear in the pattern.

  PCRE_NOTBOL

This option specifies that first character of the subject string is not the beginning of a line, so the circumflex metacharacter should not match before it. Setting this without PCRE_MULTILINE (at compile time) causes circumflex never to match. This option affects only the behaviour of the circumflex metacharacter. It does not affect \A.

  PCRE_NOTEOL

This option specifies that the end of the subject string is not the end of a line, so the dollar metacharacter should not match it nor (except in multiline mode) a newline immediately before it. Setting this without PCRE_MULTILINE (at compile time) causes dollar never to match. This option affects only the behaviour of the dollar metacharacter. It does not affect \Z or \z.

  PCRE_NOTEMPTY

An empty string is not considered to be a valid match if this option is set. If there are alternatives in the pattern, they are tried. If all the alternatives match the empty string, the entire match fails. For example, if the pattern

  a?b?

is applied to a string not beginning with "a" or "b", it matches the empty string at the start of the subject. With PCRE_NOTEMPTY set, this match is not valid, so PCRE searches further into the string for occurrences of "a" or "b".

Perl has no direct equivalent of PCRE_NOTEMPTY, but it does make a special case of a pattern match of the empty string within its split() function, and when using the /g modifier. It is possible to emulate Perl's behaviour after matching a null string by first trying the match again at the same offset with PCRE_NOTEMPTY and PCRE_ANCHORED, and then if that fails by advancing the starting offset (see below) and trying an ordinary match again. There is some code that demonstrates how to do this in the pcredemo.c sample program.

  PCRE_NO_UTF8_CHECK

When PCRE_UTF8 is set at compile time, the validity of the subject as a UTF-8 string is automatically checked when pcre_exec() is subsequently called. The value of startoffset is also checked to ensure that it points to the start of a UTF-8 character. There is a discussion about the validity of UTF-8 strings in the section on UTF-8 support in the main pcre page. If an invalid UTF-8 sequence of bytes is found, pcre_exec() returns the error PCRE_ERROR_BADUTF8. If startoffset contains an invalid value, PCRE_ERROR_BADUTF8_OFFSET is returned.

If you already know that your subject is valid, and you want to skip these checks for performance reasons, you can set the PCRE_NO_UTF8_CHECK option when calling pcre_exec(). You might want to do this for the second and subsequent calls to pcre_exec() if you are making repeated calls to find all the matches in a single subject string. However, you should be sure that the value of startoffset points to the start of a UTF-8 character. When PCRE_NO_UTF8_CHECK is set, the effect of passing an invalid UTF-8 string as a subject, or a value of startoffset that does not point to the start of a UTF-8 character, is undefined. Your program may crash.

  PCRE_PARTIAL

This option turns on the partial matching feature. If the subject string fails to match the pattern, but at some point during the matching process the end of the subject was reached (that is, the subject partially matches the pattern and the failure to match occurred only because there were not enough subject characters), pcre_exec() returns PCRE_ERROR_PARTIAL instead of PCRE_ERROR_NOMATCH. When PCRE_PARTIAL is used, there are restrictions on what may appear in the pattern. These are discussed in the pcrepartial documentation.

The string to be matched by pcre_exec()

The subject string is passed to pcre_exec() as a pointer in subject, a length (in bytes) in length, and a starting byte offset in startoffset. In UTF-8 mode, the byte offset must point to the start of a UTF-8 character. Unlike the pattern string, the subject may contain binary zero bytes. When the starting offset is zero, the search for a match starts at the beginning of the subject, and this is by far the most common case.

A non-zero starting offset is useful when searching for another match in the same subject by calling pcre_exec() again after a previous success. Setting startoffset differs from just passing over a shortened string and setting PCRE_NOTBOL in the case of a pattern that begins with any kind of lookbehind. For example, consider the pattern

  \Biss\B

which finds occurrences of "iss" in the middle of words. (\B matches only if the current position in the subject is not a word boundary.) When applied to the string "Mississipi" the first call to pcre_exec() finds the first occurrence. If pcre_exec() is called again with just the remainder of the subject, namely "issipi", it does not match, because \B is always false at the start of the subject, which is deemed to be a word boundary. However, if pcre_exec() is passed the entire string again, but with startoffset set to 4, it finds the second occurrence of "iss" because it is able to look behind the starting point to discover that it is preceded by a letter.

If a non-zero starting offset is passed when the pattern is anchored, one attempt to match at the given offset is made. This can only succeed if the pattern does not require the match to be at the start of the subject.

How pcre_exec() returns captured substrings

In general, a pattern matches a certain portion of the subject, and in addition, further substrings from the subject may be picked out by parts of the pattern. Following the usage in Jeffrey Friedl's book, this is called "capturing" in what follows, and the phrase "capturing subpattern" is used for a fragment of a pattern that picks out a substring. PCRE supports several other kinds of parenthesized subpattern that do not cause substrings to be captured.

Captured substrings are returned to the caller via a vector of integers whose address is passed in ovector. The number of elements in the vector is passed in ovecsize, which must be a non-negative number. Note: this argument is NOT the size of ovector in bytes.

The first two-thirds of the vector is used to pass back captured substrings, each substring using a pair of integers. The remaining third of the vector is used as workspace by pcre_exec() while matching capturing subpatterns, and is not available for passing back information. The number passed in ovecsize should always be a multiple of three. If it is not, it is rounded down.

When a match is successful, information about captured substrings is returned in pairs of integers, starting at the beginning of ovector, and continuing up to two-thirds of its length at the most. The first element of each pair is set to the byte offset of the first character in a substring, and the second is set to the byte offset of the first character after the end of a substring. Note: these values are always byte offsets, even in UTF-8 mode. They are not character counts.

The first pair of integers, ovector[0] and ovector[1], identify the portion of the subject string matched by the entire pattern. The next pair is used for the first capturing subpattern, and so on. The value returned by pcre_exec() is one more than the highest numbered pair that has been set. For example, if two substrings have been captured, the returned value is 3. If there are no capturing subpatterns, the return value from a successful match is 1, indicating that just the first pair of offsets has been set.

If a capturing subpattern is matched repeatedly, it is the last portion of the string that it matched that is returned.

If the vector is too small to hold all the captured substring offsets, it is used as far as possible (up to two-thirds of its length), and the function returns a value of zero. If the substring offsets are not of interest, pcre_exec() may be called with ovector passed as NULL and ovecsize as zero. However, if the pattern contains back references and the ovector is not big enough to remember the related substrings, PCRE has to get additional memory for use during matching. Thus it is usually advisable to supply an ovector.

The pcre_info() function can be used to find out how many capturing subpatterns there are in a compiled pattern. The smallest size for ovector that will allow for n captured substrings, in addition to the offsets of the substring matched by the whole pattern, is (n+1)*3.

It is possible for capturing subpattern number n+1 to match some part of the subject when subpattern n has not been used at all. For example, if the string "abc" is matched against the pattern (a|(z))(bc) the return from the function is 4, and subpatterns 1 and 3 are matched, but 2 is not. When this happens, both values in the offset pairs corresponding to unused subpatterns are set to -1.

Offset values that correspond to unused subpatterns at the end of the expression are also set to -1. For example, if the string "abc" is matched against the pattern (abc)(x(yz)?)? subpatterns 2 and 3 are not matched. The return from the function is 2, because the highest used capturing subpattern number is 1. However, you can refer to the offsets for the second and third capturing subpatterns if you wish (assuming the vector is large enough, of course).

Some convenience functions are provided for extracting the captured substrings as separate strings. These are described below.

Error return values from pcre_exec()

If pcre_exec() fails, it returns a negative number. The following are defined in the header file:

  PCRE_ERROR_NOMATCH        (-1)

The subject string did not match the pattern.

  PCRE_ERROR_NULL           (-2)

Either code or subject was passed as NULL, or ovector was NULL and ovecsize was not zero.

  PCRE_ERROR_BADOPTION      (-3)

An unrecognized bit was set in the options argument.

  PCRE_ERROR_BADMAGIC       (-4)

PCRE stores a 4-byte "magic number" at the start of the compiled code, to catch the case when it is passed a junk pointer and to detect when a pattern that was compiled in an environment of one endianness is run in an environment with the other endianness. This is the error that PCRE gives when the magic number is not present.

  PCRE_ERROR_UNKNOWN_OPCODE (-5)

While running the pattern match, an unknown item was encountered in the compiled pattern. This error could be caused by a bug in PCRE or by overwriting of the compiled pattern.

  PCRE_ERROR_NOMEMORY       (-6)

If a pattern contains back references, but the ovector that is passed to pcre_exec() is not big enough to remember the referenced substrings, PCRE gets a block of memory at the start of matching to use for this purpose. If the call via pcre_malloc() fails, this error is given. The memory is automatically freed at the end of matching.

  PCRE_ERROR_NOSUBSTRING    (-7)

This error is used by the pcre_copy_substring(), pcre_get_substring(), and pcre_get_substring_list() functions (see below). It is never returned by pcre_exec().

  PCRE_ERROR_MATCHLIMIT     (-8)

The backtracking limit, as specified by the match_limit field in a pcre_extra structure (or defaulted) was reached. See the description above.

  PCRE_ERROR_CALLOUT        (-9)

This error is never generated by pcre_exec() itself. It is provided for use by callout functions that want to yield a distinctive error code. See the pcrecallout documentation for details.

  PCRE_ERROR_BADUTF8        (-10)

A string that contains an invalid UTF-8 byte sequence was passed as a subject.

  PCRE_ERROR_BADUTF8_OFFSET (-11)

The UTF-8 byte sequence that was passed as a subject was valid, but the value of startoffset did not point to the beginning of a UTF-8 character.

  PCRE_ERROR_PARTIAL        (-12)

The subject string did not match, but it did match partially. See the pcrepartial documentation for details of partial matching.

  PCRE_ERROR_BADPARTIAL     (-13)

The PCRE_PARTIAL option was used with a compiled pattern containing items that are not supported for partial matching. See the pcrepartial documentation for details of partial matching.

  PCRE_ERROR_INTERNAL       (-14)

An unexpected internal error has occurred. This error could be caused by a bug in PCRE or by overwriting of the compiled pattern.

  PCRE_ERROR_BADCOUNT       (-15)

This error is given if the value of the ovecsize argument is negative.

  PCRE_ERROR_RECURSIONLIMIT (-21)

The internal recursion limit, as specified by the match_limit_recursion field in a pcre_extra structure (or defaulted) was reached. See the description above.

  PCRE_ERROR_BADNEWLINE     (-23)

An invalid combination of PCRE_NEWLINE_xxx options was given.

Error numbers -16 to -20 and -22 are not used by pcre_exec().

EXTRACTING CAPTURED SUBSTRINGS BY NUMBER

int pcre_copy_substring(const char *subject, int *ovector, int stringcount, int stringnumber, char *buffer, int buffersize);

int pcre_get_substring(const char *subject, int *ovector, int stringcount, int stringnumber, const char **stringptr);

int pcre_get_substring_list(const char *subject, int *ovector, int stringcount, const char ***listptr);

Captured substrings can be accessed directly by using the offsets returned by pcre_exec() in ovector. For convenience, the functions pcre_copy_substring(), pcre_get_substring(), and pcre_get_substring_list() are provided for extracting captured substrings as new, separate, zero-terminated strings. These functions identify substrings by number. The next section describes functions for extracting named substrings.

A substring that contains a binary zero is correctly extracted and has a further zero added on the end, but the result is not, of course, a C string. However, you can process such a string by referring to the length that is returned by pcre_copy_substring() and pcre_get_substring(). Unfortunately, the interface to pcre_get_substring_list() is not adequate for handling strings containing binary zeros, because the end of the final string is not independently indicated.

The first three arguments are the same for all three of these functions: subject is the subject string that has just been successfully matched, ovector is a pointer to the vector of integer offsets that was passed to pcre_exec(), and stringcount is the number of substrings that were captured by the match, including the substring that matched the entire regular expression. This is the value returned by pcre_exec() if it is greater than zero. If pcre_exec() returned zero, indicating that it ran out of space in ovector, the value passed as stringcount should be the number of elements in the vector divided by three.

The functions pcre_copy_substring() and pcre_get_substring() extract a single substring, whose number is given as stringnumber. A value of zero extracts the substring that matched the entire pattern, whereas higher values extract the captured substrings. For pcre_copy_substring(), the string is placed in buffer, whose length is given by buffersize, while for pcre_get_substring() a new block of memory is obtained via pcre_malloc, and its address is returned via stringptr. The yield of the function is the length of the string, not including the terminating zero, or one of these error codes:

  PCRE_ERROR_NOMEMORY       (-6)

The buffer was too small for pcre_copy_substring(), or the attempt to get memory failed for pcre_get_substring().

  PCRE_ERROR_NOSUBSTRING    (-7)

There is no substring whose number is stringnumber.

The pcre_get_substring_list() function extracts all available substrings and builds a list of pointers to them. All this is done in a single block of memory that is obtained via pcre_malloc. The address of the memory block is returned via listptr, which is also the start of the list of string pointers. The end of the list is marked by a NULL pointer. The yield of the function is zero if all went well, or the error code

  PCRE_ERROR_NOMEMORY       (-6)

if the attempt to get the memory block failed.

When any of these functions encounter a substring that is unset, which can happen when capturing subpattern number n+1 matches some part of the subject, but subpattern n has not been used at all, they return an empty string. This can be distinguished from a genuine zero-length substring by inspecting the appropriate offset in ovector, which is negative for unset substrings.

The two convenience functions pcre_free_substring() and pcre_free_substring_list() can be used to free the memory returned by a previous call of pcre_get_substring() or pcre_get_substring_list(), respectively. They do nothing more than call the function pointed to by pcre_free, which of course could be called directly from a C program. However, PCRE is used in some situations where it is linked via a special interface to another programming language that cannot use pcre_free directly; it is for these cases that the functions are provided.

EXTRACTING CAPTURED SUBSTRINGS BY NAME

int pcre_get_stringnumber(const pcre *code, const char *name);

int pcre_copy_named_substring(const pcre *code, const char *subject, int *ovector, int stringcount, const char *stringname, char *buffer, int buffersize);

int pcre_get_named_substring(const pcre *code, const char *subject, int *ovector, int stringcount, const char *stringname, const char **stringptr);

To extract a substring by name, you first have to find associated number. For example, for this pattern

  (a+)b(?<xxx>\d+)...

the number of the subpattern called "xxx" is 2. If the name is known to be unique (PCRE_DUPNAMES was not set), you can find the number from the name by calling pcre_get_stringnumber(). The first argument is the compiled pattern, and the second is the name. The yield of the function is the subpattern number, or PCRE_ERROR_NOSUBSTRING (-7) if there is no subpattern of that name.

Given the number, you can extract the substring directly, or use one of the functions described in the previous section. For convenience, there are also two functions that do the whole job.

Most of the arguments of pcre_copy_named_substring() and pcre_get_named_substring() are the same as those for the similarly named functions that extract by number. As these are described in the previous section, they are not re-described here. There are just two differences:

First, instead of a substring number, a substring name is given. Second, there is an extra argument, given at the start, which is a pointer to the compiled pattern. This is needed in order to gain access to the name-to-number translation table.

These functions call pcre_get_stringnumber(), and if it succeeds, they then call pcre_copy_substring() or pcre_get_substring(), as appropriate. NOTE: If PCRE_DUPNAMES is set and there are duplicate names, the behaviour may not be what you want (see the next section).

DUPLICATE SUBPATTERN NAMES

int pcre_get_stringtable_entries(const pcre *code, const char *name, char **first, char **last);

When a pattern is compiled with the PCRE_DUPNAMES option, names for subpatterns are not required to be unique. Normally, patterns with duplicate names are such that in any one match, only one of the named subpatterns participates. An example is shown in the pcrepattern documentation.

When duplicates are present, pcre_copy_named_substring() and pcre_get_named_substring() return the first substring corresponding to the given name that is set. If none are set, PCRE_ERROR_NOSUBSTRING (-7) is returned; no data is returned. The pcre_get_stringnumber() function returns one of the numbers that are associated with the name, but it is not defined which it is.

If you want to get full details of all captured substrings for a given name, you must use the pcre_get_stringtable_entries() function. The first argument is the compiled pattern, and the second is the name. The third and fourth are pointers to variables which are updated by the function. After it has run, they point to the first and last entries in the name-to-number table for the given name. The function itself returns the length of each entry, or PCRE_ERROR_NOSUBSTRING (-7) if there are none. The format of the table is described above in the section entitled Information about a pattern. Given all the relevant entries for the name, you can extract each of their numbers, and hence the captured data, if any.

FINDING ALL POSSIBLE MATCHES

The traditional matching function uses a similar algorithm to Perl, which stops when it finds the first match, starting at a given point in the subject. If you want to find all possible matches, or the longest possible match, consider using the alternative matching function (see below) instead. If you cannot use the alternative function, but still need to find all possible matches, you can kludge it up by making use of the callout facility, which is described in the pcrecallout documentation.

What you have to do is to insert a callout right at the end of the pattern. When your callout function is called, extract and save the current matched substring. Then return 1, which forces pcre_exec() to backtrack and try other alternatives. Ultimately, when it runs out of matches, pcre_exec() will yield PCRE_ERROR_NOMATCH.

MATCHING A PATTERN: THE ALTERNATIVE FUNCTION

The function pcre_dfa_exec() is called to match a subject string against a compiled pattern, using a matching algorithm that scans the subject string just once, and does not backtrack. This has different characteristics to the normal algorithm, and is not compatible with Perl. Some of the features of PCRE patterns are not supported. Nevertheless, there are times when this kind of matching can be useful. For a discussion of the two matching algorithms, see the pcrematching documentation.

The arguments for the pcre_dfa_exec() function are the same as for pcre_exec(), plus two extras. The ovector argument is used in a different way, and this is described below. The other common arguments are used in the same way as for pcre_exec(), so their description is not repeated here.

The two additional arguments provide workspace for the function. The workspace vector should contain at least 20 elements. It is used for keeping track of multiple paths through the pattern tree. More workspace will be needed for patterns and subjects where there are a lot of potential matches.

Here is an example of a simple call to pcre_dfa_exec():

  int rc;
  int ovector[10];
  int wspace[20];
  rc = pcre_dfa_exec(
    re,             /* result of pcre_compile() */
    NULL,           /* we didn't study the pattern */
    "some string",  /* the subject string */
    11,             /* the length of the subject string */
    0,              /* start at offset 0 in the subject */
    0,              /* default options */
    ovector,        /* vector of integers for substring information */
    10,             /* number of elements (NOT size in bytes) */
    wspace,         /* working space vector */
    20);            /* number of elements (NOT size in bytes) */

Option bits for pcre_dfa_exec()

The unused bits of the options argument for pcre_dfa_exec() must be zero. The only bits that may be set are PCRE_ANCHORED, PCRE_NEWLINE_xxx, PCRE_NOTBOL, PCRE_NOTEOL, PCRE_NOTEMPTY, PCRE_NO_UTF8_CHECK, PCRE_PARTIAL, PCRE_DFA_SHORTEST, and PCRE_DFA_RESTART. All but the last three of these are the same as for pcre_exec(), so their description is not repeated here.

  PCRE_PARTIAL

This has the same general effect as it does for pcre_exec(), but the details are slightly different. When PCRE_PARTIAL is set for pcre_dfa_exec(), the return code PCRE_ERROR_NOMATCH is converted into PCRE_ERROR_PARTIAL if the end of the subject is reached, there have been no complete matches, but there is still at least one matching possibility. The portion of the string that provided the partial match is set as the first matching string.

  PCRE_DFA_SHORTEST

Setting the PCRE_DFA_SHORTEST option causes the matching algorithm to stop as soon as it has found one match. Because of the way the alternative algorithm works, this is necessarily the shortest possible match at the first possible matching point in the subject string.

  PCRE_DFA_RESTART

When pcre_dfa_exec() is called with the PCRE_PARTIAL option, and returns a partial match, it is possible to call it again, with additional subject characters, and have it continue with the same match. The PCRE_DFA_RESTART option requests this action; when it is set, the workspace and wscount options must reference the same vector as before because data about the match so far is left in them after a partial match. There is more discussion of this facility in the pcrepartial documentation.

Successful returns from pcre_dfa_exec()

When pcre_dfa_exec() succeeds, it may have matched more than one substring in the subject. Note, however, that all the matches from one run of the function start at the same point in the subject. The shorter matches are all initial substrings of the longer matches. For example, if the pattern

  <.*>

is matched against the string

  This is <something> <something else> <something further> no more

the three matched strings are

  <something>
  <something> <something else>
  <something> <something else> <something further>

On success, the yield of the function is a number greater than zero, which is the number of matched substrings. The substrings themselves are returned in ovector. Each string uses two elements; the first is the offset to the start, and the second is the offset to the end. In fact, all the strings have the same start offset. (Space could have been saved by giving this only once, but it was decided to retain some compatibility with the way pcre_exec() returns data, even though the meaning of the strings is different.)

The strings are returned in reverse order of length; that is, the longest matching string is given first. If there were too many matches to fit into ovector, the yield of the function is zero, and the vector is filled with the longest matches.

Error returns from pcre_dfa_exec()

The pcre_dfa_exec() function returns a negative number when it fails. Many of the errors are the same as for pcre_exec(), and these are described above. There are in addition the following errors that are specific to pcre_dfa_exec():

  PCRE_ERROR_DFA_UITEM      (-16)

This return is given if pcre_dfa_exec() encounters an item in the pattern that it does not support, for instance, the use of \C or a back reference.

  PCRE_ERROR_DFA_UCOND      (-17)

This return is given if pcre_dfa_exec() encounters a condition item that uses a back reference for the condition, or a test for recursion in a specific group. These are not supported.

  PCRE_ERROR_DFA_UMLIMIT    (-18)

This return is given if pcre_dfa_exec() is called with an extra block that contains a setting of the match_limit field. This is not supported (it is meaningless).

  PCRE_ERROR_DFA_WSSIZE     (-19)

This return is given if pcre_dfa_exec() runs out of space in the workspace vector.

  PCRE_ERROR_DFA_RECURSE    (-20)

When a recursive subpattern is processed, the matching function calls itself recursively, using private vectors for ovector and workspace. This error is given if the output vector is not large enough. This should be extremely rare, as a vector of size 1000 is used.