[c]FP-CTR-500
All addresses are decimal. All byte values are hexadecimal.
Attributes
| Channel (Type) |
Least Significant Digits of Address |
Name | Setting | Value |
|---|---|---|---|---|
| Counter n (Count Input) |
8n | Range | 065535 Counts | 40 |
| Terminal Count LSB (Least Significant Byte) |
065535 | 00-FF | ||
| 8n + 1 | Terminal Count MSB (Most Significant Byte) |
00-FF | ||
| Clock Source | External Count Input | 00 | ||
| Previous Channel | 01 | |||
| 1 khz Reference | 02 | |||
| 32 kHz Reference | 03 | |||
| 8n + 2 | Gate Source | Gate Input 0 | 00 | |
| Gate Input 1 | 01 | |||
| Gate Input 2 | 02 | |||
| Gate Input 3 | 03 | |||
| Always Disabled | 04 | |||
| Always Enabled | 05 | |||
| Read Reset Mode | Don't Reset on Read | 00 | ||
| Reset on Read | 01 | |||
| 8n + 3 | Noise Rejection | 200 Hz | 03 | |
| 50 kHz | 04 | |||
| Reserved | | 00 | ||
| Gate n (Discrete Input) |
8n + 64 | Range | Boolean | 10 |
| Reserved | | 00 | ||
| Output n (Discrete Output) |
8n + 96 | Range | Boolean | 10 |
| Output Source | Counter 0 | 00 | ||
| Counter 1 | 01 | |||
| Counter 2 | 02 | |||
| Counter 3 | 03 | |||
| Counter 4 | 04 | |||
| Counter 5 | 05 | |||
| Counter 6 | 06 | |||
| Counter 7 | 07 | |||
| Discrete Data | 08 | |||
| 8n + 97 | Output Mode | Toggle, Reset Off | 00 | |
| Toggle, Reset On | 01 | |||
| On Pulse | 02 | |||
| Off Pulse | 03 | |||
| Reserved | | 00 |
Commands
| Channel (Type) |
Least Significant Digits of Address |
Name | Setting | Value |
|---|---|---|---|---|
| Count n (Count Input) |
8n | Control | Reset | 01 |
| Increment | 02 | |||
| Reserved | | 00 |