Accessing the Switch Soft Front Panel
You can access the Switch SFP from within Measurement & Automation Explorer (MAX) or from the Start menu. To launch the Switch SFP from the Tools menu in MAX or from the Start menu, NI-SWITCH 2.4 or later must be installed.
 |
Note The Switch SFP does not support switch devices used with the LabVIEW Real-Time Module. |
From MAX
- Right-click on the switch device, and select Test Panels.
or
- Select Tools»Soft Front Panels»NI-SWITCH Soft Front Panel.
From the Start Menu
Select Start»All Programs»National Instruments»NI-SWITCH»NI-SWITCH Soft Front Panel.