NI PXI-5404 Power-Up and Reset Conditions

NI PXI-5404
Power-Up and Reset Conditions

When you power up the computer, the NI PXI-5404 is in the following state:

• The outputs do not have a signal.
• REF IN and PFI 0 connectors are not functional and do not react to any input signals.

When you reset the device using NI-FGEN, the NI PXI-5404 is in the following state:

• The device is stopped (not generating).
• The SINE and CLOCK output terminals are enabled, but no signal is seen because the device is not generating.
• CLOCK and SINE output amplitudes are set to their maximum values.
• CLOCK and SINE frequencies are set to 1 MHz.
• The PLL reference source is set to internal tuning (the VCXO is not locked to an external reference signal).
• The CLOCK duty cycle is set to 50%.
• Trigger source is set to immediate.