niDMM Restore Last External Cal Constants
Reverts the device to the calibration constants from the last complete external calibration. This VI recovers the hardware if a fatal system error occurs during an external or self-calibration procedure.
 |
Note The NI 4050 and NI 4060 are not supported. |
For the NI 4070/4071/4072 only, after calling this VI, you should use niDMM Self Cal before taking measurements with the device to readjust the device for temperature changes since the last external calibration.
 |
instrument handle identifies a particular instrument session. You obtain the instrument handle parameter from niDMM Initialize or niDMM Initialize With Options. The default is None. |
||||||
 |
error in (no error) describes error conditions that occur before this VI runs. If an error occurred before this VI runs, the VI passes the error in value to error out. This VI runs normally only if no error occurs before this VI runs. If an error occurs while this VI runs, it continues and sets its own error status in error out. Use niDMM Error Message to display the description of the error code. Use error in and error out to check errors and to specify execution order by wiring error out from one node to error in of the next node.
|
||||||
 |
error out contains error information. If error in indicates that an error occurred before this VI ran, error out contains the same error information. Otherwise, it describes the error status that this VI produces. Right-click the error out indicator on the front panel and select Explain Error from the shortcut menu for more information about the error.
|
||||||
 |
instrument handle out returns a handle that you use to identify the instrument in all subsequent instrument driver VI calls. |
