SCC-FT01
Some hardware accessories may not yet reflect the NI-DAQmx terminal names shown here. If you are using a device in Traditional NI-DAQ (Legacy), refer to the Terminal Name Equivalents table for the Traditional NI-DAQ (Legacy) signal names.
Terminal Connector Input Pin Assignments
The following table shows the signals available if you plug the SCC-FT01 into AI single-stage SCC sockets J1-J8 or AO SCC sockets J17 and J18.
Screw Terminal Number | Screw Terminal Label | AI Single-Stage SCC Socket J1-J8 | AO SCC Socket J17 | AO SCC Socket J18 |
---|---|---|---|---|
6 |
CH+ |
AI |
AO 0 |
AO 1 |
5 |
CH- |
AI +8 |
AO GND |
AO GND |
4 |
AI GND |
AI GND |
PFI 5 |
PFI 5 |
3 |
AI SENSE |
AI SENSE |
AO 1 |
AO 0 |
2 |
EXT REF |
— |
EXT REF |
EXT REF |
1 |
NC |
— |
— |
— |
Note These are the default signals. Refer to the SCC-FT01 User Manual for details about custom configurations. |