Pre-Scaled Units
Data Type: | int32 |
Description: | Specifies the units of the values that you want to scale. |
Valid values
DAQmx_Val_Volts | 10348 | Volts. |
DAQmx_Val_Amps | 10342 | Amperes. |
DAQmx_Val_DegF | 10144 | Degrees Fahrenheit. |
DAQmx_Val_DegC | 10143 | Degrees Celsius. |
DAQmx_Val_DegR | 10145 | Degrees Rankine. |
DAQmx_Val_Kelvins | 10325 | Kelvins. |
DAQmx_Val_Strain | 10299 | Strain. |
DAQmx_Val_Ohms | 10384 | Ohms. |
DAQmx_Val_Hz | 10373 | Hertz. |
DAQmx_Val_Seconds | 10364 | Seconds. |
DAQmx_Val_Meters | 10219 | Meters. |
DAQmx_Val_Inches | 10379 | Inches. |
DAQmx_Val_Degrees | 10146 | Degrees. |
DAQmx_Val_Radians | 10273 | Radians. |
DAQmx_Val_g | 10186 | 1 g is approximately equal to 9.81 m/s/s. |
DAQmx_Val_MetersPerSecondSquared | 12470 | Meters per second per second. |
DAQmx_Val_Pascals | 10081 | Pascals. |
DAQmx_Val_FromTEDS | 12516 | Units defined by TEDS information associated with the channel. |
You can get/set this property using:
DAQmxGetScalePreScaledUnits
DAQmxSetScalePreScaledUnits