Clocks >> Sample Clock >> Pulse >> Polarity
| Data Type: | int32 |
| Description: | Specifies the polarity of the exported Sample Clock if Output Behavior is DAQmx_Val_Pulse. |
Valid values
| DAQmx_Val_ActiveHigh | 10095 | High state is the active state. |
| DAQmx_Val_ActiveLow | 10096 | Low state is the active state. |
You can get/set/reset this property using:
DAQmxGetExportedSampClkPulsePolarity
DAQmxSetExportedSampClkPulsePolarity
DAQmxResetExportedSampClkPulsePolarity