Start >> Analog Edge >> Slope
Data Type: | int32 |
Description: | Specifies on which slope of the trigger signal to start acquiring or generating samples. |
Valid values
DAQmx_Val_RisingSlope | 10280 | Trigger on the rising slope of the signal. |
DAQmx_Val_FallingSlope | 10171 | Trigger on the falling slope of the signal. |
You can get/set/reset this property using:
DAQmxGetAnlgEdgeStartTrigSlope
DAQmxSetAnlgEdgeStartTrigSlope
DAQmxResetAnlgEdgeStartTrigSlope