MEMory:STATe:RECall:AUTO

MEMory:STATe:RECall:AUTO

Syntax | Description | Parameters | Remarks | Return Format | Examples

Syntax

MEMory:STATe:RECall:AUTO <mode>

MEMory:STATe:RECall:AUTO?

Description

This command enables or disables (default) the automatic recall of the power-down state (state 0) when power is turned on. Select "ON" to automatically recall the power-down state. Select "OFF" to issue a Factory Reset (*RST) when power is turned on (in this mode, the power-down state is not automatically recalled).

Parameters

Name	Type	Range of Values	Default Value
<mode>	Boolean	{OFF|0|ON|1}	This is a required parameter.

Remarks

• When the instrument is shipped from the factory, the automatic recall mode is disabled.
• State 0 gets stored every time the power is turned off.

Return Format

The query returns 0 (OFF) or 1 (ON).

Examples

The following command enables the automatic recall mode.  

MEM:STAT:REC:AUTO ON

The following query returns the automatic recall setting.

MEM:STAT:REC:AUTO?

Typical Response: 1

See Also

MEMory Subsystem Introduction

*SAV