SYSTem:COMMunicate:LAN:UPDate

previous page next page

SYSTem:COMMunicate:LAN:UPDate

This functionality is available on the 34972A only.

Syntax

Description

This command updates all of the LAN changes. It disconnects all active LAN and Web connections and restarts the LAN interface, possibly with a new IP address, depending on how your instrument's IP address is assigned.

Remarks

Executing this command is necessary to make the following commands take effect:

SYSTem:COMMunicate:LAN:DHCP

SYSTem:COMMunicate:LAN:DNS

SYSTem:COMMunicate:LAN:GATEway

SYSTem:COMMunicate:LAN:HOSTname

SYSTem:COMMunicate:LAN:IPADdress

SYSTem:COMMunicate:LAN:SMASk
Be very careful when you execute this command, because your instrument may not work on the LAN if you update the instrument with invalid LAN settings.
If your instrument does not work after you execute this command, push the LAN Reset front panel softkey to restore the settings to reset values and reset the LAN, or use another I/O interface, such as USB, to correct the settings.

Example

The commands below demonstrate a typical use model for setting and applying LAN parameters.

SYST:COMM:LAN:DHCP OFF
SYST:COMM:LAN:IPADdress "192.168.1.2"
SYST:COMM:LAN:SMASk "255.255.0.0"
SYST:COMM:LAN:GATEway "192.168.1.1"
SYST:COMM:LAN:UPDate

SYSTem:COMMunicate:LAN:UPDate