[SENSe:]TEMPerature:RJUNction?

[SENSe:]TEMPerature:RJUNction?

Syntax | Description | Parameters | Remarks | Return Format | Example

Syntax

[SENSe:]TEMPerature:RJUNction? [(@<ch_list>)]

Description

This query returns he internal reference junction temperature on the specified channels. This is useful only for an internal reference source).

Parameters

Name	Type	Range of Values	Default Value
<ch_list>	Channel List	One or more channels, as shown: (@310) - channel 10 on the module in slot 300. (@305:310) - channels 05 through 10 on the module in slot 300. (@202:207,209,302:308) - channels 02 through 07 and 09 on the module in slot 200 and channels 02 through 08 on the module in slot 300.	If you omit the optional <ch_list> parameter, this command applies to the currently defined scan list.

Remarks

• This query returns the reference temperature in degrees Celsius, regardless of the temperature units currently selected (see UNIT:TEMPerature command).

Return Format

The query returns a number in the form +2.89753100E+01.

Example

The following query returns the temperature of the internal reference junction on channels 03, 04, and 05 in slot 200.

TEMP:RJUN? (@203:205) !Always returns result in degrees Celsius

Typical Response: +2.35212231E+01,+2.37701293E+01,+2.38291321E+01

See Also

SENSe Subsystem Introduction