Save MultiPoint Position and Intensity Data
This menu will output a tab delimited file of position and intensities for samples with multi-point background data.
Note that only samples with multi-point data will have columns of multi-point data. But all samples will have their normal high and low peak position and intensity data output.
BACKTYP Background acquisition type, 0=off-peak, 1=MAN, 2=multi-point
OFFTYP Background correction type, 0=linear, 1=average, 2=high only, 3=low only, 4=exponential, 5=slope hi, 6=slope lo, 7=polynomial, 8=multi-point
NECNT Corrected on-peak intensity (background, etc. interference corrected)
OFCNT Calculated background intensity
MACQHI MultiPoint parameters, number of acquire high side points
MACQLO MultiPoint parameters, number of acquire low side points
MUITHI MultiPoint parameters, number of high side points to iterate to
MUITLO MultiPoint parameters, number of low side points to iterate to
MULFIT MultiPoint parameters, multi-point fit type, 0=linear, 1=polynomial, 2=exponential
MHIpos MultiPoint high side positions
MLOpos MultiPoint low side positions
MHIint MultiPoint high side intensities
MLOint MultiPoint low side intensities
MHItim MultiPoint high side count times
MLOtim MultiPoint low side count times
MHIflg MultiPoint high side manual override flags
MLOflg MultiPoint high side manual override flags
ONPOS On-peak positions
HIPOS Hi-peak positions (averaged for multi-point)
LOPOS Lo-peak positions (averaged for multi-point)
ONCNT On-peak intensities
HICNT Hi-peak intensities (average of multi-point intensities)
LOCNT Lo-peak intensities (average of multi-point intensities)
ONTIM On peak count times
HITIM Hi peak count times
LOTIM Lo peak count times
DETIM Deadtime parameters
BEAMCUR Line beam current
BEAM Element beam current (combined conditions only)