Connectivity

From Creative Sound Blaster X-Fi Xtreme Gamer

previous page next page

Connectivity

Sound Blaster X-Fi audio card

Audio Inputs

One analog input via stereo jack on rear bracket (selectable from line-level analog line input or mono microphone analog input)

AUX_IN line-level analog input via 4-pin Molex connector on card

Audio Outputs

Three line-level analog outputs via 4-pole 3.50 mm (1/8-inch) jacks on rear bracket: Front Left, Front Right, Rear Left, Rear Right, Side Right, Center, Subwoofer and Side Left channels

Stereo headphone (32-ohm load) support on Line Out 1 jack

For SB046X and SB055X series: Digital Out via 3.50 mm (1/8-inch) jack on rear bracket (sharing with the Line In/Microphone In jack)

For SB073X series: Optical Out via 3.50 mm (1/8-inch) jack on rear bracket (sharing with the Line In/Microphone In jack)

Interfaces

4-pin power supply header for connection to the system power supply unit, supplying power to the X-Fi I/O Console*

2 x 20 pin AD_EXT header for connection to the X-Fi I/O Drive*

2 x 5 pin Front Panel Header for connections with Intel HD Front Panel Audio standard header (For SB073X series only)

One AD_Link (26 pin) connector for linking to the X-Fi I/O Console*

Digital I/O Module*

Audio Inputs

Optical jack for optical SPDIF input

Coaxial jack for coaxial SPDIF input

Audio Outputs

Optical jack for optical SPDIF output

Coaxial jack for coaxial SPDIF output

Sound Blaster X-Fi I/O Drive*

Inputs and outputs on front panel

Two RCA jacks for coaxial SPDIF input and output

Headphone output and volume control with auto detection via 6.35 mm (1/4-inch) stereo jack

Shared line-level analog Line/Microphone input via 6.35 mm (1/4-inch) stereo jack. Shared input selectable via dial with gain control for microphone.

Two mini MIDI female connectors for MIDI input and output

Two RCA jacks for Auxiliary input

Two optical connectors for optical SPDIF input and output

Infrared receiver for receiving infrared signals from the remote control. Transmission range within four meters (13 feet) with 15-degree deviation from the center axis.

Interfaces

4-pin power supply header for connection to system power supply unit

2 x 20 pin AD_EXT header for connection to Sound Blaster X-Fi audio card

Sound Blaster X-Fi I/O Console*

Inputs and outputs on front panel

Headphone output and volume control with auto detection via 6.35 mm (1/4-inch) stereo jack

Shared line-level analog Line/Hi-Z input via 6.35 mm (1/4-inch) stereo jack. Shared input selectable via dial with gain control for Hi-Z input.

Shared line-level analog Line/Microphone input via 6.35 mm (1/4-inch) stereo jack. Shared input selectable via dial with gain control for microphone.

Infrared receiver for receiving infrared signals from the remote control. Transmission range within four meters (13 feet) with 15-degree deviation from the center axis.

Inputs and outputs on rear panel

Two RCA jacks for Auxiliary input

DIN jack for connection to supported Creative analog speaker systems with the wired remote control or Audio Control Pod that comes with the speakers

Two standard MIDI female connectors for MIDI input and output

Two optical connectors for optical SPDIF input and output

Two RCA jacks for coaxial SPDIF input and output

Interfaces

One AD_LINK connector for linking to the audio card

Notes

*Available with some models of your audio device, or as an upgrade accessory in some regions.

previous page start next page