 |
Configure()
| Public Function |
Declared in: NiIviScope.h |
Declaration
inline void Configure(
const CString &source,
double level,
long slope);
Description
Configures the edge trigger.
Parameters
const CString &source
double level
long slope
Specifies the source the oscilloscope monitors for a trigger. Set this property to a channel name or to one of the values below.
- CNiIviScope::ExternalTrigger - External
- CNiIviScope::Ttl0Trigger - PXI TRIG0 or VXI TTL0
- CNiIviScope::Ttl1Trigger - PXI TRIG1 or VXI TTL1
- CNiIviScope::Ttl2Trigger - PXI TRIG2 or VXI TTL2
- CNiIviScope::Ttl3Trigger - PXI TRIG3 or VXI TTL3
- CNiIviScope::Ttl4Trigger - PXI TRIG4 or VXI TTL4
- CNiIviScope::Ttl5Trigger - PXI TRIG5 or VXI TTL5
- CNiIviScope::Ttl6Trigger - PXI TRIG6 or VXI TTL6
- CNiIviScope::Ttl7Trigger - PXI TRIG7 or VXI TTL7
- CNiIviScope::Ecl0Trigger - VXI ECL0
- CNiIviScope::Ecl1Trigger - VXI ECL1
- CNiIviScope::PxiStarTrigger - PXI Star
- CNiIviScope::Rtsi0Trigger - RTSI line 0
- CNiIviScope::Rtsi1Trigger - RTSI line 1
- CNiIviScope::Rtsi2Trigger - RTSI line 2
- CNiIviScope::Rtsi3Trigger - RTSI line 3
- CNiIviScope::Rtsi4Trigger - RTSI line 4
- CNiIviScope::Rtsi5Trigger - RTSI line 5
- CNiIviScope::Rtsi6Trigger - RTSI line 6
This function sets the Trigger.Source property to the value you specify for this parameter.
Specifies the voltage threshold in volts for the trigger subsystems.
This function sets the Trigger.Level property to the value you specify for this parameter.
Specifies whether a rising or a falling edge triggers the oscilloscope.
The following list includes valid values:
- CNiIviScope::Positive - Rising edge.
- CNiIviScope::Negative - Falling edge.
This function sets the Slope property to the value you specify for this parameter.
