Variables and Expressions
Table of Contents
Variables
See Variables for general explanation and details about how variables work.
Storing values in variables: To store a string or number in a variable, there are two methods: legacy and expression. The legacy method uses the equal sign operator (=) to assign unquoted literal strings or variables enclosed in percent signs. For example:
MyNumber = 123 MyString = This is a literal string. CopyOfVar = %Var% ; With the = operator, percent signs are required to retrieve a variable's contents.
By contrast, the expression method uses the colon-equal operator (:=) to store numbers, quoted strings, and other types of expressions. The following examples are functionally identical to the previous ones:
MyNumber := 123 MyString := "This is a literal string." CopyOfVar := Var ; Unlike its counterpart in the previous section, percent signs are not used with the := operator.
The latter method is preferred by many due to its greater clarity, and because it supports an expression syntax nearly identical to that in many other languages.
You may have guessed from the above that there are two methods to erase the contents of a variable (that is, to make it blank):
MyVar = MyVar := ""
The empty pair of quotes above should be used only with the := operator because if it were used with the = operator, it would store two literal quote-characters inside the variable.
Retrieving the contents of variables: Like the two methods of storing values, there are also two methods for retrieving them: legacy and expression. The legacy method requires that each variable name be enclosed in percent signs to retrieve its contents. For example:
MsgBox The value in the variable named Var is %Var%. CopyOfVar = %Var%
By contrast, the expression method omits the percent signs around variable names, but encloses literal strings in quotes. Thus, the following are the expression equivalents of the previous examples:
MsgBox % "The value in the variable named Var is " . Var . "." ; A period is used to concatenate (join) two strings. CopyOfVar := Var
In the MsgBox line above, a percent sign and a space is used to change the parameter from legacy to expression mode. This is necessary because the legacy method is used by default by all commands, except where otherwise documented.
Comparing variables: Please read the expressions section below for important notes about the different kinds of comparisons, especially about when to use parentheses.
Expressions
See Expressions for a structured overview and further explanation.
Expressions are used to perform one or more operations upon a series of variables, literal strings, and/or literal numbers.
Variable names in an expression are not enclosed in percent signs (except for pseudo-arrays and other double references). Consequently, literal strings must be enclosed in double quotes to distinguish them from variables. For example:
if (CurrentSetting > 100 or FoundColor <> "Blue")
MsgBox The setting is too high or the wrong color is present.
In the example above, "Blue" appears in quotes because it is a literal string. To include an actual quote-character inside a literal string, specify two consecutive quotes as shown twice in this example: "She said, ""An apple a day.""".
Important: An if-statement that contains an expression is differentiated from a traditional if-statement such as If FoundColor <> Blue by making the character after the word "if" an open-parenthesis. Although this is usually accomplished by enclosing the entire expression in parentheses, it can also be done with something like if (x > 0) and (y > 0). In addition, the open-parenthesis may be omitted entirely if the first item after the word "if" is a function call or an operator such as "not" or "!".
Empty strings: To specify an empty string in an expression, use an empty pair of quotes. For example, the statement if (MyVar <> "") would be true if MyVar is not blank. However, in a traditional-if, a pair of empty quotes is treated literally. For example, the statement if MyVar = "" is true only if MyVar contains an actual pair of quotes. Thus, to check if a variable is blank with a traditional-if, use = or <> with nothing on the right side as in this example: if Var =.
On a related note, any invalid expression such as (x +* 3) yields an empty string.
Storing the result of an expression: To assign a result to a variable, use the := operator. For example:
NetPrice := Price * (1 - Discount/100)
Boolean values: When an expression is required to evaluate to true or false (such as an IF-statement), a blank or zero result is considered false and all other results are considered true. For example, the statement if ItemCount would be false only if ItemCount is blank or 0. Similarly, the expression if not ItemCount would yield the opposite result.
Operators such as NOT/AND/OR/>/=/< automatically produce a true or false value: they yield 1 for true and 0 for false. For example, in the following expression, the variable Done is assigned 1 if either of the conditions is true:
Done := A_Index > 5 or FoundIt
As hinted above, a variable can be used to hold a false value simply by making it blank or assigning 0 to it. To take advantage of this, the shorthand statement if Done can be used to check whether the variable Done is true or false.
The words true and false are built-in variables containing 1 and 0. They can be used to make a script more readable as in these examples:
CaseSensitive := false ContinueSearch := true
Integers and floating point: Within an expression, numbers are considered to be floating point if they contain a decimal point; otherwise, they are integers. For most operators -- such as addition and multiplication -- if either of the inputs is a floating point number, the result will also be a floating point number.
Within expressions and non-expressions alike, integers may be written in either hexadecimal or decimal format. Hexadecimal numbers all start with the prefix 0x. For example, Sleep 0xFF is equivalent to Sleep 255. [v1.0.46.11+]: Floating point numbers written in scientific notation are recognized; but only if they contain a decimal point (e.g. 1.0e4 and -2.1E-4).
Force an expression: An expression can be used in a parameter that does not directly support it (except OutputVar parameters) by preceding the expression with a percent sign and a space or tab. In [v1.1.21+], this prefix can be used in the InputVar parameters of all commands except the traditional IF commands (use If (expression) instead). This technique is often used to access arrays. For example:
FileAppend, % MyArray[i], My File.txt FileAppend, % MyPseudoArray%i%, My File.txt MsgBox % "The variable MyVar contains " . MyVar . "." Loop % Iterations + 1 WinSet, Transparent, % X + 100 Control, Choose, % CurrentSelection - 1
Operators in Expressions
See Operators for general information about operators.
Except where noted below, any blank value (empty string) or non-numeric value involved in a math operation is not assumed to be zero. Instead, it is treated as an error, which causes that part of the expression to evaluate to an empty string. For example, if the variable X is blank, the expression X+1 yields a blank value rather than 1.
For historical reasons, quoted numeric strings such as "123" are always considered non-numeric when used directly in an expression (but not when stored in a variable or returned by a function). This non-numeric attribute is propagated by concatenation, so expressions like "0x" n also produce a non-numeric value (even when n contains valid hexadecimal digits). This problem can be avoided by assigning the value to a variable or passing it through a function like Round(). Scripts should avoid using quote marks around literal numbers, as the behavior may change in a future version.
Expression Operators (in descending precedence order)
| %Var% | If a variable is enclosed in percent signs within an expression (e.g. %Var%), whatever that variable contains is assumed to be the name or partial name of another variable (if there is no such variable, %Var% resolves to a blank string). This is most commonly used to reference pseudo-array elements such as the following example: Var := MyArray%A_Index% + 100 For backward compatibility, command parameters that are documented as "can be an expression" treat an isolated name in percent signs (e.g. %Var%, but not Array%i%) as though the percent signs are absent. This can be avoided by enclosing the reference in parentheses; e.g. [AHK_L 52+]: In addition to normal variables, %Var% may resolve to an environment variable, the clipboard, or any reserved/read-only variable. Prior to revision 52, %Var% yielded an empty string in these cases. |
| x.y | [AHK_L 31+]: Object access. Get or set a value or call a method of object x, where y is a literal value. See object syntax. |
| new | [v1.1.00+]: Creates a new object derived from another object. For example, x := new y is often equivalent to x := {base: y}. new should be followed by a variable or simple class name of the form GlobalClass.NestedClass, and optionally parameters as in x := new y(z) (where y is a variable, not a function name). For details, see Custom Objects. |
| ++ -- |
Pre- and post-increment/decrement. Adds or subtracts 1 from a variable (but in versions prior to 1.0.46, these can be used only by themselves on a line; no other operators may be present). The operator may appear either before or after the variable's name. If it appears before the name, the operation is performed immediately and its result is used by the next operation. For example, Var := ++X increments X immediately and then assigns its value to Var. Conversely, if the operator appears after the variable's name, the operation is performed after the variable is used by the next operation. For example, Var := X++ increments X only after assigning the current value of X to Var. Due to backward compatibility, the operators ++ and -- treat blank variables as zero, but only when they are alone on a line; for example, y:=1, ++x and MsgBox % ++x both produce a blank result when x is blank. |
| ** |
Power. Both the base and the exponent may contain a decimal point. If the exponent is negative, the result will be formatted as a floating point number even if the base and exponent are both integers. Since ** is of higher precedence than unary minus, Note: A negative base combined with a fractional exponent such as |
| - ! ~ & * |
Unary minus (-): Although it uses the same symbol as the subtract operator, unary minus applies to only a single item or sub-expression as shown twice in this example: Logical-not (!): If the operand is blank or 0, the result of applying logical-not is 1, which means "true". Otherwise, the result is 0 (false). For example: Bitwise-not (~): This inverts each bit of its operand. If the operand is a floating point value, it is truncated to an integer prior to the calculation. If the operand is between 0 and 4294967295 (0xffffffff), it will be treated as an unsigned 32-bit value. Otherwise, it is treated as a signed 64-bit value. For example, Address (&): Dereference (*): |
| * / // |
Multiply (*): The result is an integer if both inputs are integers; otherwise, it is a floating point number. True divide (/): Unlike EnvDiv, true division yields a floating point result even when both inputs are integers. For example, Floor divide (//): The double-slash operator uses high-performance integer division if the two inputs are integers. For example, The *= and /= operators are a shorthand way to multiply or divide the value in a variable by another value. For example, Division by zero yields a blank result (empty string). |
| + - |
Add (+) and subtract (-). On a related note, the += and -= operators are a shorthand way to increment or decrement a variable. For example, |
| << >> |
Bit shift left (<<) and right (>>). Example usage: Value1 << Value2. Any floating point input is truncated to an integer prior to the calculation. Shift left (<<) is equivalent to multiplying Value1 by "2 to the Value2th power". Shift right (>>) is equivalent to dividing Value1 by "2 to the Value2th power" and rounding the result to the nearest integer leftward on the number line; for example, -3>>1 is -2. |
| & ^ | |
Bitwise-and (&), bitwise-exclusive-or (^), and bitwise-or (|). Of the three, & has the highest precedence and | has the lowest. Any floating point input is truncated to an integer prior to the calculation. |
| . | Concatenate. The period (dot) operator is used to combine two items into a single string (there must be at least one space on each side of the period). You may also omit the period to achieve the same result (except where ambiguous such as Sub-expressions can also be concatenated. For example: A line that begins with a period (or any other operator) is automatically appended to the line above it. |
| ~= | [AHK_L 31+]: Shorthand for RegExMatch. For example, "abc123" ~= "\d" sets ErrorLevel to 0 and yields 4 (the position of the first numeric character). Prior to [v1.1.03], this operator had the same precedence as the equal (=) operator and was not fully documented. |
| > < >= <= |
Greater (>), less (<), greater-or-equal (>=), and less-or-equal (<=). If either of the inputs is not a number, both are compared alphabetically (a quoted literal string such as "55" is always considered non-numeric in this context). The comparison is case sensitive only if StringCaseSense has been turned on. See also: Sort |
| = == <> != |
Equal (=), case-sensitive-equal (==), and not-equal (<> or !=). The operators != and <> are identical in function. The == operator behaves identically to = except when either of the inputs is not a number, in which case == is always case sensitive and = is always case insensitive (the method of insensitivity depends on StringCaseSense). By contrast, <> and != obey StringCaseSense. Note: A quoted literal string such as "55" is always considered non-numeric in this context. |
| NOT | Logical-NOT. Except for its lower precedence, this is the same as the ! operator. For example, not (x = 3 or y = 3) is the same as !(x = 3 or y = 3). |
| AND && |
Both of these are logical-AND. For example: x > 3 and x < 10. To enhance performance, short-circuit evaluation is applied. Also, a line that begins with AND/OR/&&/|| (or any other operator) is automatically appended to the line above it. |
| OR || |
Both of these are logical-OR. For example: x <= 3 or x >= 10. To enhance performance, short-circuit evaluation is applied. |
| ?: | Ternary operator [v1.0.46+]. This operator is a shorthand replacement for the if-else statement. It evaluates the condition on its left side to determine which of its two branches should become its final result. For example, var := x>y ? 2 : 3 stores 2 in Var if x is greater than y; otherwise it stores 3. To enhance performance, only the winning branch is evaluated (see short-circuit evaluation). |
| := += -= *= /= //= .= |= &= ^= >>= <<= |
Assign. Performs an operation on the contents of a variable and stores the result back in the same variable (but in versions prior to 1.0.46, these could only be used as the leftmost operator on a line, and only the first five operators were supported). The simplest assignment operator is colon-equals (:=), which stores the result of an expression in a variable. For a description of what the other operators do, see their related entries in this table. For example, Unlike most other operators, assignments are evaluated from right to left. Consequently, a line such as If an assignment is used as the input for some other operator, its value is the variable itself. For example, the expression The precedence of the assignment operators is automatically raised when it would avoid a syntax error or provide more intuitive behavior. For example: Known limitations caused by backward compatibility (these may be resolved in a future release): 1) When /= is the leftmost operator in an expression and it is not part of a multi-statement expression, it performs floor division unless one of the inputs is floating point (in all other cases, /= performs true division); 2) Date/time math is supported by += and -= only when that operator is the leftmost one on a line; 3) The operators +=, -=, and *= treat blank variables as zero, but only when they are alone on a line; for example, |
| , | Comma (multi-statement) [v1.0.46+]. Commas may be used to write multiple sub-expressions on a single line. This is most commonly used to group together multiple assignments or function calls. For example: Note: A line that begins with a comma (or any other operator) is automatically appended to the line above it. See also: comma performance. [v1.0.46.01+]: When a comma is followed immediately by a variable and an equal sign, that equal sign is automatically treated as an assignment (:=). For example, all of the following are assignments: |
The following types of sub-expressions override precedence/order of evaluation:
| (expression) | Any sub-expression enclosed in parentheses. For example, |
mod() |
Function call. The function name must be immediately followed by an open-parentheses, without any spaces or tabs in between. For details, see Functions. |
%func%() |
See Dynamically Calling a Function. |
| func.() | Deprecated: This syntax is not recommended for use. Use [AHK_L 48+]: Attempts to call an empty-named method of the object func. By convention, this is the object's "default" method. If func does not contain an object, the default base object is invoked instead. [v1.0.95+]: If func contains a function name, the named function is called. |
| Fn(Params*) | [AHK_L 60+]: Variadic function call. Params is an array (object) containing parameter values. |
| x[y] [a, b, c] |
[AHK_L 31+]: Member access. Get or set a value or call a method of object x, where y is a parameter list (typically an array index or key) or an expression which returns a method name. [v1.0.97+]: Array literal. If the open-bracket is not preceded by a value (or a sub-expression which yields a value), it is interpreted as the beginning of an array literal. For example, See array syntax and object syntax for more details. |
| {a: b, c: d} | [v1.0.97+]: Object literal. Create an object or associative array. For example, |
Performance: [v1.0.48+]: The comma operator is usually faster than writing separate expressions, especially when assigning one variable to another (e.g. x:=y, a:=b). Performance continues to improve as more and more expressions are combined into a single expression; for example, it may be 35% faster to combine five or ten simple expressions into a single expression.
Built-in Variables
The variables below are built into the program and can be referenced by any script.
See Built-in Variables for general information.
Table of Contents
- Special Characters: A_Space, A_Tab
- Script Properties: command line parameters, A_WorkingDir, A_ScriptDir, A_ScriptName, (...more...)
- Date and Time: A_YYYY, A_MM, A_DD, A_Hour, A_Min, A_Sec, (...more...)
- Script Settings: A_IsSuspended, A_BatchLines, A_TitleMatchMode, (...more...)
- User Idle Time: A_TimeIdle, A_TimeIdlePhysical
- GUI Windows and Menu Bars: A_Gui, A_GuiControl, A_GuiEvent, A_EventInfo
- Hotkeys, Hotstrings, and Custom Menu Items: A_ThisHotkey, A_EndChar, A_ThisMenuItem, (...more...)
- Operating System and User Info: A_OSVersion, A_ScreenWidth, A_ScreenHeight, (...more...)
- Misc: A_Cursor, A_CaretX, A_CaretY, Clipboard, ClipboardAll, ErrorLevel
- Loop: A_Index, (...more...)
Special Characters
| A_Space | This variable contains a single space character. See AutoTrim for details. |
| A_Tab | This variable contains a single tab character. See AutoTrim for details. |
Script Properties
| 1, 2, 3, etc. | These variables are automatically created whenever a script is launched with command line parameters. They can be changed and referenced just like normal variable names (for example: %1%), but cannot be referenced directly in an expression. The variable %0% contains the number of parameters passed (0 if none). For details, see the command line parameters. |
| A_Args [v1.1.27+] |
Read/write: Contains an array of command line parameters. For details, see Passing Command Line Parameters to a Script. |
| A_WorkingDir | The script's current working directory, which is where files will be accessed by default. The final backslash is not included unless it is the root directory. Two examples: C:\ and C:\My Documents. Use SetWorkingDir to change the working directory. |
| A_ScriptDir | The full path of the directory where the current script is located. The final backslash is omitted (even for root directories). |
| A_ScriptName | The file name of the current script, without its path, e.g. MyScript.ahk. |
| A_ScriptFullPath | The combination of the above two variables to give the complete file specification of the script, e.g. C:\My Documents\My Script.ahk |
| A_ScriptHwnd [v1.1.01+] |
The unique ID (HWND/handle) of the script's hidden main window. |
| A_LineNumber | The number of the currently executing line within the script (or one of its #Include files). This line number will match the one shown by ListLines; it can be useful for error reporting such as this example: Since a compiled script has merged all its #Include files into one big script, its line numbering may be different than when it is run in non-compiled mode. |
| A_LineFile | The full path and name of the file to which A_LineNumber belongs, which will be the same as A_ScriptFullPath unless the line belongs to one of a non-compiled script's #Include files. |
| A_ThisFunc [v1.0.46.16+] |
The name of the user-defined function that is currently executing (blank if none); for example: MyFunction. See also: IsFunc() |
| A_ThisLabel [v1.0.46.16+] |
The name of the label (subroutine) that is currently executing (blank if none); for example: MyLabel. It is updated whenever the script executes Gosub/Return or Goto. It is also updated for automatically-called labels such as timers, GUI threads, menu items, hotkeys, hotstrings, OnClipboardChange (label), and OnExit. However, A_ThisLabel is not updated when execution "falls into" a label from above; when that happens, A_ThisLabel retains its previous value. See also: A_ThisHotkey and IsLabel() |
| A_AhkVersion | In versions prior to 1.0.22, this variable is blank. Otherwise, it contains the version of AutoHotkey that is running the script, such as 1.0.22. In the case of a compiled script, the version that was originally used to compile it is reported. The formatting of the version number allows a script to check whether A_AhkVersion is greater than some minimum version number with > or >= as in this example: if A_AhkVersion >= 1.0.25.07. |
| A_AhkPath | For non-compiled scripts: The full path and name of the EXE file that is actually running the current script. For example: C:\Program Files\AutoHotkey\AutoHotkey.exe For compiled scripts: The same as the above except the AutoHotkey directory is discovered via the registry entry HKLM\SOFTWARE\AutoHotkey\InstallDir. If there is no such entry, A_AhkPath is blank. |
| A_IsUnicode | Contains 1 if strings are Unicode (16-bit) and an empty string (which is considered false) if strings are ANSI (8-bit). The format of strings depends on the version of AutoHotkey.exe which is used to run the script, or if it is compiled, which bin file was used to compile it. |
| A_IsCompiled | Contains 1 if the script is running as a compiled EXE and an empty string (which is considered false) if it is not. |
| A_ExitReason | The most recent reason the script was asked to terminate. This variable is blank unless the script has an OnExit subroutine and that subroutine is currently running or has been called at least once by an exit attempt. See OnExit for details. |
Date and Time
| A_YYYY |
Current 4-digit year (e.g. 2004). Synonymous with A_Year. Note: To retrieve a formatted time or date appropriate for your locale and language, use |
| A_MM | Current 2-digit month (01-12). Synonymous with A_Mon. |
| A_DD | Current 2-digit day of the month (01-31). Synonymous with A_MDay. |
| A_MMMM | Current month's full name in the current user's language, e.g. July |
| A_MMM | Current month's abbreviation in the current user's language, e.g. Jul |
| A_DDDD | Current day of the week's full name in the current user's language, e.g. Sunday |
| A_DDD | Current day of the week's 3-letter abbreviation in the current user's language, e.g. Sun |
| A_WDay | Current 1-digit day of the week (1-7). 1 is Sunday in all locales. |
| A_YDay | Current day of the year (1-366). The value is not zero-padded, e.g. 9 is retrieved, not 009. To retrieve a zero-padded value, use the following: FormatTime, OutputVar,, YDay0. |
| A_YWeek | Current year and week number (e.g. 200453) according to ISO 8601. To separate the year from the week, use StringLeft, Year, A_YWeek, 4 and StringRight, Week, A_YWeek, 2. Precise definition of A_YWeek: If the week containing January 1st has four or more days in the new year, it is considered week 1. Otherwise, it is the last week of the previous year, and the next week is week 1. |
| A_Hour | Current 2-digit hour (00-23) in 24-hour time (for example, 17 is 5pm). To retrieve 12-hour time as well as an AM/PM indicator, follow this example: FormatTime, OutputVar, , h:mm:ss tt |
| A_Min | Current 2-digit minute (00-59). |
| A_Sec | Current 2-digit second (00-59). |
| A_MSec | Current 3-digit millisecond (000-999). To remove the leading zeros, follow this example: Milliseconds := A_MSec + 0. |
| A_Now |
The current local time in YYYYMMDDHH24MISS format. Note: Date and time math can be performed with EnvAdd and EnvSub. Also, FormatTime can format the date and/or time according to your locale or preferences. |
| A_NowUTC | The current Coordinated Universal Time (UTC) in YYYYMMDDHH24MISS format. UTC is essentially the same as Greenwich Mean Time (GMT). |
| A_TickCount | The number of milliseconds since the computer was rebooted. By storing A_TickCount in a variable, elapsed time can later be measured by subtracting that variable from the latest A_TickCount value. For example: StartTime := A_TickCount Sleep, 1000 ElapsedTime := A_TickCount - StartTime MsgBox, %ElapsedTime% milliseconds have elapsed. If you need more precision than A_TickCount's 10ms, use QueryPerformanceCounter(). |
Script Settings
| A_IsSuspended | Contains 1 if the script is suspended and 0 otherwise. |
| A_IsPaused [v1.0.48+] |
Contains 1 if the thread immediately underneath the current thread is paused. Otherwise it contains 0. |
| A_IsCritical [v1.0.48+] |
Contains 0 if Critical is off for the current thread. Otherwise it contains an integer greater than zero, namely the message-check frequency being used by Critical. Since Critical 0 turns off critical, the current state of Critical can be saved and restored via Old_IsCritical := A_IsCritical followed later by Critical %Old_IsCritical%. |
| A_BatchLines | (synonymous with A_NumBatchLines) The current value as set by SetBatchLines. Examples: 200 or 10ms (depending on format). |
| A_TitleMatchMode | The current mode set by SetTitleMatchMode: 1, 2, 3, or RegEx. |
| A_TitleMatchModeSpeed | The current match speed (fast or slow) set by SetTitleMatchMode. |
| A_DetectHiddenWindows | The current mode (On or Off) set by DetectHiddenWindows. |
| A_DetectHiddenText | The current mode (On or Off) set by DetectHiddenText. |
| A_AutoTrim | The current mode (On or Off) set by AutoTrim. |
| A_StringCaseSense | The current mode (On, Off, or Locale) set by StringCaseSense. |
| A_FileEncoding | [AHK_L 46+]: Contains the default encoding for various commands; see FileEncoding. |
| A_FormatInteger | The current integer format (H or D) set by SetFormat. [AHK_L 42+]: This may also contain lower-case h. |
| A_FormatFloat | The current floating point number format set by SetFormat. |
| A_SendMode | [v1.1.23+]: The current mode (Event, Input, Play or InputThenPlay) set by SendMode. |
| A_SendLevel | [v1.1.23+]: The current SendLevel setting (an integer between 0 and 100, inclusive). |
| A_StoreCapslockMode | [v1.1.23+]: The current mode (On or Off) set by SetStoreCapslockMode. |
| A_KeyDelay A_KeyDuration |
The current delay or duration set by SetKeyDelay (always decimal, not hex). A_KeyDuration requires [v1.1.23+]. |
| A_KeyDelayPlay A_KeyDurationPlay |
The current delay or duration set by SetKeyDelay for the SendPlay mode (always decimal, not hex). Requires [v1.1.23+]. |
| A_WinDelay | The current delay set by SetWinDelay (always decimal, not hex). |
| A_ControlDelay | The current delay set by SetControlDelay (always decimal, not hex). |
| A_MouseDelay A_MouseDelayPlay |
The current delay set by SetMouseDelay (always decimal, not hex). A_MouseDelay is for the traditional SendEvent mode, whereas A_MouseDelayPlay is for SendPlay. A_MouseDelayPlay requires [v1.1.23+]. |
| A_DefaultMouseSpeed | The current speed set by SetDefaultMouseSpeed (always decimal, not hex). |
| A_CoordModeToolTip A_CoordModePixel A_CoordModeMouse A_CoordModeCaret A_CoordModeMenu |
[v1.1.23+]: The current mode (Window, Client or Screen) set by CoordMode. |
| A_RegView | [v1.1.08+]: The current registry view as set by SetRegView. |
| A_IconHidden | Contains 1 if the tray icon is currently hidden or 0 otherwise. The icon can be hidden via #NoTrayIcon or the Menu command. |
| A_IconTip | Blank unless a custom tooltip for the tray icon has been specified via Menu, Tray, Tip -- in which case it's the text of the tip. |
| A_IconFile | Blank unless a custom tray icon has been specified via Menu, tray, icon -- in which case it's the full path and name of the icon's file. Known limitation: This path may be incorrect if the script originally passed a relative path to a system DLL; for example, Menu, Tray, Icon, user32.dll, 2. |
| A_IconNumber | Blank if A_IconFile is blank. Otherwise, it's the number of the icon in A_IconFile (typically 1). |
User Idle Time
| A_TimeIdle | The number of milliseconds that have elapsed since the system last received keyboard, mouse, or other input. This is useful for determining whether the user is away. Physical input from the user as well as artificial input generated by any program or script (such as the Send or MouseMove commands) will reset this value back to zero. Since this value tends to increase by increments of 10, do not check whether it is equal to another value. Instead, check whether it is greater or less than another value. For example: IfGreater, A_TimeIdle, 600000, MsgBox, The last keyboard or mouse activity was at least 10 minutes ago. |
| A_TimeIdlePhysical | Similar to above but ignores artificial keystrokes and/or mouse clicks whenever the corresponding hook (keyboard or mouse) is installed; that is, it responds only to physical events. (This prevents simulated keystrokes and mouse clicks from falsely indicating that a user is present.) If neither hook is installed, this variable is equivalent to A_TimeIdle. If only one hook is installed, only its type of physical input affects A_TimeIdlePhysical (the other/non-installed hook's input, both physical and artificial, has no effect). |
GUI Windows and Menu Bars
| A_DefaultGui [v1.1.23+] | The name or number of the current thread's default GUI. |
| A_DefaultListView [v1.1.23+] | The variable name or HWND of the ListView control upon which the ListView functions operate. If the default GUI lacks a ListView, this variable is blank. |
| A_DefaultTreeView [v1.1.23+] | The variable name or HWND of the TreeView control upon which the TreeView functions operate. If the default GUI lacks a TreeView, this variable is blank. |
| A_Gui | The name or number of the GUI that launched the current thread. This variable is blank unless a Gui control, menu bar item, or event such as GuiClose/GuiEscape launched the current thread. |
| A_GuiControl | The name of the variable associated with the GUI control that launched the current thread. If that control lacks an associated variable, A_GuiControl instead contains the first 63 characters of the control's text/caption (this is most often used to avoid giving each button a variable name). A_GuiControl is blank whenever: 1) A_Gui is blank; 2) a GUI menu bar item or event such as GuiClose/GuiEscape launched the current thread; 3) the control lacks an associated variable and has no caption; or 4) The control that originally launched the current thread no longer exists (perhaps due to Gui Destroy). |
| A_GuiWidth A_GuiHeight |
These contain the GUI window's width and height when referenced in a GuiSize subroutine. They apply to the window's client area, which is the area excluding title bar, menu bar, and borders. [v1.1.11+]: These values are affected by DPI scaling. |
| A_GuiX A_GuiY |
These contain the X and Y coordinates for GuiContextMenu and GuiDropFiles events. Coordinates are relative to the upper-left corner of the window. [v1.1.11+]: These values are affected by DPI scaling. |
| A_GuiEvent or A_GuiControlEvent |
The type of event that launched the current thread. If the thread was not launched via GUI action, this variable is blank. Otherwise, it contains one of the following strings: Normal: The event was triggered by a single left-click or via keystrokes (arrow keys, TAB key, space bar, underlined shortcut key, etc.). This value is also used for menu bar items and the special events such as GuiClose and GuiEscape. DoubleClick: The event was triggered by a double-click. Note: The first click of the click-pair will still cause a Normal event to be received first. In other words, the subroutine will be launched twice: once for the first click and again for the second. RightClick: Occurs only for GuiContextMenu, ListViews, and TreeViews. Context-sensitive values: For details see GuiContextMenu, GuiDropFiles, Slider, MonthCal, ListView, and TreeView. |
| A_EventInfo | Contains additional information about the following events:
|
Note: Unlike variables such as A_ThisHotkey, each thread retains its own value for A_Gui, A_GuiControl, A_GuiX/Y, A_GuiEvent, and A_EventInfo. Therefore, if a thread is interrupted by another, upon being resumed it will still see its original/correct values in these variables.
Hotkeys, Hotstrings, and Custom Menu Items
| A_ThisMenuItem | The name of the most recently selected custom menu item (blank if none). |
| A_ThisMenu | The name of the menu from which A_ThisMenuItem was selected. |
| A_ThisMenuItemPos | A number indicating the current position of A_ThisMenuItem within A_ThisMenu. The first item in the menu is 1, the second is 2, and so on. Menu separator lines are counted. This variable is blank if A_ThisMenuItem is blank or no longer exists within A_ThisMenu. It is also blank if A_ThisMenu itself no longer exists. |
| A_ThisHotkey | The most recently executed hotkey or non-auto-replace hotstring (blank if none), e.g. #z. This value will change if the current thread is interrupted by another hotkey, so be sure to copy it into another variable immediately if you need the original value for later use in a subroutine. When a hotkey is first created -- either by the Hotkey command or a double-colon label in the script -- its key name and the ordering of its modifier symbols becomes the permanent name of that hotkey, shared by all variants of the hotkey. See also: A_ThisLabel |
| A_PriorHotkey | Same as above except for the previous hotkey. It will be blank if none. |
| A_PriorKey | [v1.1.01+]: The name of the last key which was pressed prior to the most recent key-press or key-release, or blank if no applicable key-press can be found in the key history. All input generated by AutoHotkey scripts is excluded. For this variable to be of use, the keyboard or mouse hook must be installed and key history must be enabled. |
| A_TimeSinceThisHotkey | The number of milliseconds that have elapsed since A_ThisHotkey was pressed. It will be -1 whenever A_ThisHotkey is blank. |
| A_TimeSincePriorHotkey | The number of milliseconds that have elapsed since A_PriorHotkey was pressed. It will be -1 whenever A_PriorHotkey is blank. |
| A_EndChar | The ending character that was pressed by the user to trigger the most recent non-auto-replace hotstring. If no ending character was required (due to the * option), this variable will be blank. |
Operating System and User Info
| ComSpec [v1.0.43.08+] |
Contains the same string as the environment's ComSpec variable (e.g. C:\Windows\system32\cmd.exe). Often used with Run/RunWait. Note: There is no A_ prefix on the ComSpec variable. |
| A_Temp [v1.0.43.09+] |
The full path and name of the folder designated to hold temporary files (e.g. C:\DOCUME~1\<UserName>\LOCALS~1\Temp). It is retrieved from one of the following locations (in order): 1) the environment variables TMP, TEMP, or USERPROFILE; 2) the Windows directory. |
| A_OSType | The type of operating system being run. Since AutoHotkey 1.1 only supports NT-based operating systems, this is always WIN32_NT. Older versions of AutoHotkey return WIN32_WINDOWS when run on Windows 95/98/ME. |
| A_OSVersion | One of the following strings, if appropriate: WIN_7 [requires AHK_L 42+], WIN_8 [requires v1.1.08+], WIN_8.1 [requires v1.1.15+], WIN_VISTA, WIN_2003, WIN_XP, WIN_2000. Applying compatibility settings in the AutoHotkey executable or compiled script's properties causes the OS to report a different version number, which is reflected by A_OSVersion. [v1.1.20+]: If the OS version is not recognized as one of those listed above, a string in the format "major.minor.build" is returned. For example, ; This example is obsolete as these operating systems are no longer supported.
if A_OSVersion in WIN_NT4,WIN_95,WIN_98,WIN_ME ; Note: No spaces around commas.
{
MsgBox This script requires Windows 2000/XP or later.
ExitApp
}
|
| A_Is64bitOS | [v1.1.08+]: Contains 1 (true) if the OS is 64-bit or 0 (false) if it is 32-bit. |
| A_PtrSize | [AHK_L 42+]: Contains the size of a pointer, in bytes. This is either 4 (32-bit) or 8 (64-bit), depending on what type of executable (EXE) is running the script. |
| A_Language | The system's default language, which is one of these 4-digit codes. |
| A_ComputerName | The name of the computer as seen on the network. |
| A_UserName | The logon name of the user who launched this script. |
| A_WinDir | The Windows directory. For example: C:\Windows |
| A_ProgramFiles or ProgramFiles |
The Program Files directory (e.g. On 64-bit systems (and not 32-bit systems), the following applies:
[v1.0.43.08+]: The A_ prefix may be omitted, which helps ease the transition to #NoEnv. |
| A_AppData [v1.0.43.09+] |
The full path and name of the folder containing the current user's application-specific data. For example: C:\Documents and Settings\Username\Application Data |
| A_AppDataCommon [v1.0.43.09+] |
The full path and name of the folder containing the all-users application-specific data. |
| A_Desktop | The full path and name of the folder containing the current user's desktop files. |
| A_DesktopCommon | The full path and name of the folder containing the all-users desktop files. |
| A_StartMenu | The full path and name of the current user's Start Menu folder. |
| A_StartMenuCommon | The full path and name of the all-users Start Menu folder. |
| A_Programs | The full path and name of the Programs folder in the current user's Start Menu. |
| A_ProgramsCommon | The full path and name of the Programs folder in the all-users Start Menu. |
| A_Startup | The full path and name of the Startup folder in the current user's Start Menu. |
| A_StartupCommon | The full path and name of the Startup folder in the all-users Start Menu. |
| A_MyDocuments | The full path and name of the current user's "My Documents" folder. Unlike most of the similar variables, if the folder is the root of a drive, the final backslash is not included. For example, it would contain M: rather than M:\ |
| A_IsAdmin | If the current user has admin rights, this variable contains 1. Otherwise, it contains 0. To have the script restart itself as admin (or show a prompt to the user requesting admin), use Run *RunAs. However, note that running the script as admin causes all programs launched by the script to also run as admin. For a possible alternative, see the FAQ. |
A_ScreenWidth |
The width and height of the primary monitor, in pixels (e.g. 1024 and 768). To discover the dimensions of other monitors in a multi-monitor system, use SysGet. To instead discover the width and height of the entire desktop (even if it spans multiple monitors), use the following example: SysGet, VirtualWidth, 78 SysGet, VirtualHeight, 79 In addition, use SysGet to discover the work area of a monitor, which can be smaller than the monitor's total area because the taskbar and other registered desktop toolbars are excluded. |
| A_ScreenDPI [v1.1.11+] | Number of pixels per logical inch along the screen width. In a system with multiple display monitors, this value is the same for all monitors. On most systems this is 96; it depends on the system's text size (DPI) setting. See also Gui -DPIScale. |
| A_IPAddress1 through 4 | The IP addresses of the first 4 network adapters in the computer. |
Misc.
| A_Cursor | The type of mouse cursor currently being displayed. It will be one of the following words: AppStarting, Arrow, Cross, Help, IBeam, Icon, No, Size, SizeAll, SizeNESW, SizeNS, SizeNWSE, SizeWE, UpArrow, Wait, Unknown. The acronyms used with the size-type cursors are compass directions, e.g. NESW = NorthEast+SouthWest. The hand-shaped cursors (pointing and grabbing) are classified as Unknown. |
| A_CaretX A_CaretY |
The current X and Y coordinates of the caret (text insertion point). The coordinates are relative to the active window unless CoordMode is used to make them relative to the entire screen. If there is no active window or the caret position cannot be determined, these variables are blank. The following script allows you to move the caret around to see its current position displayed in an auto-update tooltip. Note that some windows (e.g. certain versions of MS Word) report the same caret position regardless of its actual position. #Persistent SetTimer, WatchCaret, 100 return WatchCaret: ToolTip, X%A_CaretX% Y%A_CaretY%, A_CaretX, A_CaretY - 20 return |
| Clipboard | The contents of the OS's clipboard, which can be read or written to. See the Clipboard section. |
| ClipboardAll | The entire contents of the clipboard (such as formatting and text). See ClipboardAll. |
| ErrorLevel | See ErrorLevel. |
| A_LastError | The result from the OS's GetLastError() function or the last COM object invocation. For details, see DllCall() and Run/RunWait. |
Loop
| A_Index | This is the number of the current loop iteration (a 64-bit integer). For example, the first time the script executes the body of a loop, this variable will contain the number 1. For details see Loop or While-loop. |
| A_LoopFileName, etc. | This and other related variables are valid only inside a file-loop. |
| A_LoopRegName, etc. | This and other related variables are valid only inside a registry-loop. |
| A_LoopReadLine | See file-reading loop. |
| A_LoopField | See parsing loop. |
Variable Capacity and Memory
- Each variable may contain up to 64 MB of text (this limit can be increased with #MaxMem).
- When a variable is given a new string longer than its current contents, additional system memory is allocated automatically.
- The memory occupied by a large variable can be freed by setting it equal to nothing, e.g.
var := "". - There is no limit to how many variables a script may create. The program is designed to support at least several million variables without a significant drop in performance.
- Commands, functions, and expressions that accept numeric inputs generally support 15 digits of precision for floating point values. For integers, 64-bit signed values are supported, which range from -9223372036854775808 (-0x8000000000000000) to 9223372036854775807 (0x7FFFFFFFFFFFFFFF). Any integer constants outside this range are not supported and might yield inconsistent results. By contrast, arithmetic operations on integers wrap around upon overflow (e.g. 0x7FFFFFFFFFFFFFFF + 1 = -0x8000000000000000).